ESP32S335D
ESP32-S3 development board with 3.5-inch touch TFT display

- LCD interface
- 16bit parallel
- Mabee interface
- 1*I2C;1*GPIO
- Arduino support
- yes
- Backlight Controller
- Yes
ESP32-S3 development board with 3.5-inch touch TFT display
Maker, Prototyping, Open-Hardware & Developer Boards
Makerfabs ESP32-S3 development board with a 3.5-inch 480x320 capacitive touch TFT display using a 16-bit parallel interface, intended for prototyping user interfaces and IoT projects with local display.
Overview. The Makerfabs ESP32S335D is an ESP32-S3 development board with a 3.5-inch TFT display, listed in the maker, prototyping and open-hardware developer boards category.
Main characteristics. The ESP32-S3-WROOM-1-N16R8 module provides 16 MB of Flash and 8 MB of PSRAM. The TFT display has a 480 x 320 resolution, an ILI9488 driver and RGB colour. The capacitive touch panel uses an FT6236 driver. The backlight is controlled.
Interfaces and connectivity. The board includes Wi-Fi and Bluetooth 5.0, a PCB antenna, a microSD slot and two USB Type-C ports, one for USB-to-UART through the CP2104 chip and one for native USB. It offers a Mabee interface with one I2C bus and one GPIO pin for connecting sensors or actuators. A Flash button and a reset button are fitted.
Power and environment. Power is supplied through USB Type-C at 5.0 V (4.0 V to 5.25 V). USB Type-C Power Delivery is not supported. The operating temperature range is -40 °C to +85 °C. Dimensions are 66 mm x 84.3 mm x 12 mm and the weight is 52 g.
Development. The board is Arduino compatible. Its parallel-interface display offers a higher refresh rate than the SPI versions, suited to animated content and local supervision interfaces.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for ESP32S335D, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Arduino support | yes |
| Backlight Controller | Yes |
| Button | Flash button and reset button |
| Color | RGB |
| Controller | PCB Antenna, 16MB Flash, 8MB PSRAM, ESP32-S3-WROOM-1-N16R8 |
| Dimension | 66mm*84.3mm*12mm |
| LCD | 3.5inch TFT LCD |
| LCD Driver | ili9488 |
| LCD interface | 16bit parallel |
| Mabee interface | 1*I2C;1*GPIO |
| microSD | Yes |
| Operation Temperature | -40℃ to +85℃ |
| Power supply | USB Type-C 5.0V(4.0V~5.25V) |
| Resolution | 480*320 |
| Touch Panel | Capacitive |
| Touch Panel Driver | FT6236 |
| Type-C Power Delivery | Not Supported |
| UART to UART Chip | CP2104 |
| USB | Dual USB Type-C(one for USB-to-UART and one for native USB) |
| Weight | 52g |
| Wireless | Wifi& Bluetooth 5.0 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for ESP32S335D. For a missing document or a specific revision, our experts send it to you.
Makerfabs ESP32-S3 development board with a 3.5-inch 480x320 capacitive touch TFT display using a 16-bit parallel interface, intended for prototyping user interfaces and IoT projects with local display.
| Parameter | Value |
|---|---|
| Arduino support | yes |
| Backlight Controller | Yes |
| Button | Flash button and reset button |
| Color | RGB |
| Controller | PCB Antenna, 16MB Flash, 8MB PSRAM, ESP32-S3-WROOM-1-N16R8 |
| Dimension | 66mm*84.3mm*12mm |
| LCD | 3.5inch TFT LCD |
| LCD Driver | ili9488 |
| LCD interface | 16bit parallel |
| Mabee interface | 1*I2C;1*GPIO |
| microSD | Yes |
| Operation Temperature | -40℃ to +85℃ |
| Power supply | USB Type-C 5.0V(4.0V~5.25V) |
| Resolution | 480*320 |
| Touch Panel | Capacitive |
| Touch Panel Driver | FT6236 |
| Type-C Power Delivery | Not Supported |
| UART to UART Chip | CP2104 |
| USB | Dual USB Type-C(one for USB-to-UART and one for native USB) |
| Weight | 52g |
| Wireless | Wifi& Bluetooth 5.0 |
Answers to the questions that the recorded characteristics of ESP32S335D can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Mabee interface": 1*I2C;1*GPIO.
Yes — recorded under "Wireless": Wifi& Bluetooth 5.0.
Yes — recorded under "Wireless": Wifi& Bluetooth 5.0.
Yes — recorded under "Power supply": USB Type-C 5.0V(4.0V~5.25V).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
ESP32-S3 development board with 3.5-inch touch TFT display

MaTouch ESP32-S3 Round SPI TFT with Touch 1.28"

Matouch 1.28" ToolSet Controller

MaTouch ESP32-S3 Parallel TFT with Touch 7“

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | ESP32S335D |
| Manufacturer | Makerfabs |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details