MaTouch ESP32-S3 – 7-inch IPS TFT display with 5-point capacitive touch

7-inch IPS TFT display with 5-point capacitive touch

Maker, Prototyping, Open-Hardware & Developer Boards

  • RGB 565
  • 1*I2C;1*GPIO
  • Yes
  • >30
Manufacturer part number
MTESPS37
Manufacturer
Makerfabs
LCD interface
RGB 565
Mabee interface
1*I2C;1*GPIO

7-inch IPS TFT display with an ESP32-S3 microcontroller and 5-point capacitive touch, for IoT interfaces and prototyping.

Product overview

Makerfabs MaTouch ESP32-S3 Parallel TFT with Touch 7-inch — display and controller board built on an ESP32-S3-WROOM-1 with 16 MB Flash and 8 MB PSRAM, designed for IoT applications and prototyping.

Main characteristics. 7-inch high-brightness IPS display available in two resolutions, 800×480 or 1024×600, RGB 565 LCD interface, frame rate above 30 FPS, and a 5-point capacitive touch panel driven by a GT911 controller.

Connectivity and interfaces. integrated Wi-Fi and Bluetooth 5.0 with PCB antenna, dual USB Type-C ports (one for USB-to-UART via CP2104 chip, one for native USB), microSD slot for recording data, and a Mabee interface providing 1 I2C and 1 GPIO for connecting sensors. The board supports Arduino.

Power and environment. powered via USB Type-C at 5.0 V (4.0 V to 5.25 V range), USB Type-C Power Delivery not supported, with flash and reset buttons. Operating temperature from -40 °C to +85 °C.

Typical uses. embedded human-machine interfaces, display control for home automation, and prototypes combining touch display and sensors connected to the ESP32-S3.

See all specifications

Highlights

  • Arduino support: Yes
  • Button: Flash button and reset button
  • FPS: >30
  • LCD: 7 inch High Lightness IPS
  • LCD interface: RGB 565
  • microSD: Yes

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote