E32S3RGB40 – ESP32-S3 development board with 4.0 inch touch TFT display

ESP32-S3 development board with 4.0 inch touch TFT display

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
E32S3RGB40
Manufacturer
Makerfabs

Makerfabs MaTouch E32S3RGB40 development board integrating a 4.0 inch 480x480 IPS touch display, audio amplifier and Lipo charger, for IoT prototyping.

Product overview

Overview. The Makerfabs E32S3RGB40 (MaTouch ESP32-S3) is a prototyping development board with an integrated 4.0 inch touch TFT display. It is built on the ESP32-S3-WROOM-1-N16R8 module with PCB antenna, 16MB Flash and 8MB PSRAM, and supports Arduino.

Display and touch. The 4.0 inch high lightness IPS display provides 480*480 resolution, driven by an ST7701S controller over RGB 5/6/5 and SPI, at more than 50 FPS. The 5 points capacitive touch panel uses the GT911 driver.

Connectivity and interfaces. The board offers WiFi and Bluetooth 5.0, dual USB Type-C ports (one for USB-to-UART with CP2104 chip and one for native USB), a microSD slot, a Mabee interface with 1*I2C and 1*GPIO, and flash and reset buttons.

Audio. A MAX98357A amplifier provides audio output to a speaker.

Power and environment. The board is powered by USB Type-C at 5.0V (4.0V~5.25V) or by a 3.7V Lipo battery with integrated charger. The operating temperature range is -40 °C to +85 °C.

Typical uses. This board suits prototyping of human-machine interfaces and IoT applications requiring a touch display and wireless connectivity.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote