LORA4CON
4-Channel LoRa Relay Kit with Remote Controller 868 MHz

- Rated Current of Relay Contact
- 10A
- Frequency
- 868.30 MHz
- Coil Type of Relay
- Non Latching
- Coil Voltage of Relay
- 5V
4-Channel LoRa Relay Kit with Remote Controller 868 MHz
Maker, Prototyping, Open-Hardware & Developer Boards
LoRa remote control kit with a 4-channel relay and a 4-channel controller, for switching remote loads over several kilometres with status feedback.
Overview. The LORA4CON kit from Makerfabs is a remote control set made of a 4-channel LoRa relay and a 4-channel controller, based on an Aurel half-duplex radio transceiver implementing Semtech LoRa modulation. It lets you activate remote loads and build a complete remote control system with feedback.
Main characteristics. LoRa modulation provides long-distance communication over a few kilometres line of sight, high immunity to interference and a sensitivity of -122 dBm with low consumption. The controller transmits at 868.30 MHz with an output power of 10 mW (ERP). Loop control lets the controller send LoRa commands to the relay and then receive its feedback, for safe, ensured control.
Interfaces and connectivity. The relay uses an ATMEL Atmega328P microcontroller (8-bit AVR) and four non-latching relay outputs with a 5 V coil. The Arduino-based firmware and the hardware are open source, so users can modify the code, for example to raise the output power.
Power and environment. The relay is powered from DC 5 V to 12 V. The controller runs on a 3 V CR2032 lithium cell, to be installed before use. The relay contacts handle 10 A with a maximum switching voltage of 277 VAC or 28 VDC.
Typical uses. Remote switching of loads over long distances, with status feedback for secure control. A simple pairing step between relay and controller is required before common use.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for LORA4CON, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| ATMEL Atmega328P | High Performance, Low Power Atmel®AVR® 8-Bit |
| Coil Type of Relay | Non Latching |
| Coil Voltage of Relay | 5V |
| Frequency | 868.30 MHz |
| Minimum controlling | > 10,000 |
| Output power | 10 mW (ERP) |
| Power | DC 5V ~ 12V |
| Power supply | 3V (CR2032 Lithium) |
| Rated Current of Relay Contact | 10A |
| Sensitivity | -122 dBm |
| Switching Voltage of Relay | (277VAC, 28VDC) Max |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for LORA4CON. For a missing document or a specific revision, our experts send it to you.
LoRa remote control kit with a 4-channel relay and a 4-channel controller, for switching remote loads over several kilometres with status feedback.
| Parameter | Value |
|---|---|
| ATMEL Atmega328P | High Performance, Low Power Atmel®AVR® 8-Bit |
| Coil Type of Relay | Non Latching |
| Coil Voltage of Relay | 5V |
| Frequency | 868.30 MHz |
| Minimum controlling | > 10,000 |
| Output power | 10 mW (ERP) |
| Power | DC 5V ~ 12V |
| Power supply | 3V (CR2032 Lithium) |
| Rated Current of Relay Contact | 10A |
| Sensitivity | -122 dBm |
| Switching Voltage of Relay | (277VAC, 28VDC) Max |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
4-Channel LoRa Relay Kit with Remote Controller 868 MHz

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | LORA4CON |
| Manufacturer | Makerfabs |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details