LR20IL – 30 A LoRa relay module, remote controlled

30 A LoRa relay module, remote controlled

Maker, Prototyping, Open-Hardware & Developer Boards

  • 12V
  • 30A@240VAC
  • 433M/ 868M/ 915M
  • Pro mini(3.3V/8M)
Manufacturer part number
LR20IL
Manufacturer
Makerfabs
Input Voltage
12V
Current
30A@240VAC

LoRa-controlled relay module with a maximum load of 30 A at 240 VAC, intended for remote switching of an electrical circuit.

Product overview

Overview. The Makerfabs LR20IL LoRa relay is a relay module controlled remotely over a LoRa link, built for prototyping and maker projects. It is based on the RFM98W and supports LoRa communication over a maximum range of 4 to 5 km.

Main characteristics. The module handles a maximum current of 30 A at 240 VAC and operates from a 12 V input voltage. It is available for the 433 MHz, 868 MHz and 915 MHz ISM bands.

Control and programming. The controller is an Atmega328P. The module ships with the Arduino Pro Mini (3.3 V / 8 MHz) bootloader and a demo firmware, Lora Relay V1.1, which can be updated with the Arduino IDE. Reprogramming uses a common UART tool; if the tool has no DTR signal, the reset button must be pressed manually. The manufacturer recommends its CP2104 USB to serial converter for reprogramming.

Typical uses. This relay suits wireless switching of a load or actuator on a 240 VAC circuit in prototyping projects. A 4-channel version is available for controlling several loads.

See all specifications

Highlights

  • Arduino bootloader: Pro mini(3.3V/8M)
  • Controller: Atmega328P
  • Current: 30A@240VAC
  • Input Voltage: 12V
  • LoRa Frequency: 433M/ 868M/ 915M

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote