Product overview
Overview. The Makerfabs LSMS092DV2 is a LoRa sensor module measuring air temperature, air humidity and soil moisture, and transmitting its data to a gateway by LoRa communication. This is the V2 version of the sensor, fitted with a 3D-printed case.
Main characteristics. The module is based on an Atmel AVR 8-bit Atmega328P microcontroller clocked at 8 MHz, with 2 KBytes of RAM and 1 Kbyte of EEPROM. Its default baud rate is 115200 bps. Air temperature and humidity are measured by an AHT10 sensor, and soil moisture by a capacitive measurement solution built around a 555.
Connectivity and programming. The module ships with an Arduino Pro Mini 3.3 V / 8 MHz bootloader pre-loaded and a default sketch. It can be reprogrammed with the Arduino IDE using a USB-to-UART converter; the DTR signal of the converter must be connected to the Reset pin for sketch download.
Power and environment. The module operates over a temperature range of -20 to +85 °C. It is designed to run on two AAA batteries for several months, the measuring functions being switched off between readings. The waterproof coating allows longer operation in damp soil. The case is not waterproof, as the air sensor must be in direct contact with the air.
Typical uses. The sensor suits smart-farm, irrigation and agriculture applications where periodic readings are transmitted to a LoRa gateway.