MPM280P
Flush diaphragm pressure sensor

Flush diaphragm pressure sensor
The MPM280P is a flush diaphragm pressure sensor for measuring gas and liquid pressure in industrial process control and refrigeration equipment. It is available on quotation from Atlas Electronics.
Overview. The Microsensor MPM280P is a flush diaphragm pressure sensor designed to measure gas and liquid pressure in industrial process control, refrigeration equipment and air applications. Its flush diaphragm and isolated structure allow the respective fluid medium to be measured directly, without a cavity where it could accumulate.
Main characteristics. The sensor covers a pressure range from 0 bar to 350 bar, with gauge, absolute and sealed gauge measurement modes. A hygienic structure with a roughness Ra below 0.4 µm is available as an option. Negative pressure measurement is available down to around -1 bar. The overpressure rating is 2 times full scale.
Process connections. Available male connections are G1/2, R1/2, NPT1/2 and M20 x 1.5, as well as DN25 clamps with FKM or silicone O-ring seals. The flushing ring and valve body are made of 316 stainless steel.
Power supply and electrical signal. The sensor accepts either a constant current or a constant voltage power supply, as an option. Power consumption is less than or equal to 2.0 mA DC. The electrical connection is made through Kovar pins of 0.5 mm diameter or 100 mm silicone rubber flexible wires. Input impedance ranges from 2.5 kΩ to 8 kΩ, output impedance from 3.5 kΩ to 6 kΩ, and response time (10% to 90%) is below 1 ms. Insulation resistance is 100 MΩ at 100 V DC.
Integration. As the power supply and output configuration can be selected, the sensor can be integrated into existing measurement chains; the exact configuration is to be confirmed when requesting a quotation.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for MPM280P. For a missing document or a specific revision, our experts send it to you.
The MPM280P is a flush diaphragm pressure sensor for measuring gas and liquid pressure in industrial process control and refrigeration equipment. It is available on quotation from Atlas Electronics.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Flush diaphragm pressure sensor

0.2 Inch Thin Film Resistor type Pressure Sensor - FSR400 A301

Water Pressure Sensor G1/4 1.2MPa

RS485 Pipe Pressure Sensor Transmitter 100MPa

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | MPM280P |
| Manufacturer | Microsensor |
Pressure Sensor Modules
LoRaWAN pressure sensor, SS316 transducer · Ref. : LORAWAN-PRESSURE-SENSOR
Price on request
Pressure Sensor Modules
High pressure sensor with digital I²C output · Ref. : MPM283I
Price on request
Pressure Sensor Modules
Thin film hydraulic pressure sensor 0-5 to 2000 bar · Ref. : HPT906
Price on request
Pressure Sensor Modules
Zigbee temperature, humidity and air pressure sensor · Ref. : 6979033600706
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details