SP38H
Details Monosilicon Pressure Sensor

- Enter Verification Code
- *
Details Monosilicon Pressure Sensor
The SP38H Sensor adopts high-reliability monosilicon technology, with a built-in temperature sensor, which greatly improves the temperature performance.
Monosilicon Pressure Sensor
Monosilicon Pressure Sensor
Process Control, Environmental control, Flow control
Monosilicon Pressure Sensor
Process Control, Environmental control, Flow control
SP38H
· Built-in temperature sensor
· Three-diaphragm overload construction
Used For
Process Control, Environmental control, Flow control
Leave a Message
SP38H
Built-in temperature sensor
Three-diaphragm overload construction
Used For
Process Control, Environmental control, Flow control
Leave a Message
LEEG, a subsidiary of MICROSENSOR, is a leading manufacturer of hygienic transmitters in China's food and pharmaceutical industries. The SP38H Sensor adopts high-reliability monosilicon technology, with a built-in temperature sensor, which greatly improves the temperature performance. It is a comprehensive digital and smart sensor. It is resistant to high pressure and high static pressure, the static pressure can reach 40MPa. It can be used in various harsh environments, and the working temperature range is as high as -40-85°C. The pressure sensor also has the features of high measurement accuracy, high stability, strong output signal, and good long-term stability.
Features • Three-diaphragm overload structure • High long term stability <±0.05% F.S./year • Extremely low pressure and temperature hysteresis • Built-in temperature sensor • Various of isolated diaphragms to meet a wide range of anti-corrosion requirements • Rugged construction with little effect of repackaging stress
Electrical Performance • Power supply: 2.5-12VDC • Electrical connection: 110mm silicone rubber soft wire/Kovar Pins • Common mode voltage output: 50% of input (typical) • Bridge resistance: 6kΩ±0.5kΩ • Response time (10%-90% ): <2ms • Insulation resistance: >100MΩ@500VDC • Insulation strength: <5mA/500V AC
Image:
LEEG, a subsidiary of MICROSENSOR, is a leading manufacturer of hygienic transmitters in China's food and pharmaceutical industries. The SP38H Sensor adopts high-reliability monosilicon technology, with a built-in temperature sensor, which greatly improves the temperature performance. It is a comprehensive digital and smart sensor. It is resistant to high pressure and high static pressure, the static pressure can reach 40MPa. It can be used in various harsh environments, and the working temperature range is as high as -40-85°C. The pressure sensor also has the features of high measurement accuracy, high stability, strong output signal, and good long-term stability.
Features • Three-diaphragm overload structure • High long term stability <±0.05% F.S./year • Extremely low pressure and temperature hysteresis • Built-in temperature sensor • Various of isolated diaphragms to meet a wide range of anti-corrosion requirements • Rugged construction with little effect of repackaging stress
Electrical Performance • Power supply: 2.5-12VDC • Electrical connection: 110mm silicone rubber soft wire/Kovar Pins • Common mode voltage output: 50% of input (typical) • Bridge resistance: 6kΩ±0.5kΩ • Response time (10%-90% ): <2ms • Insulation resistance: >100MΩ@500VDC • Insulation strength: <5mA/500V AC
Read / Download our Datasheet in PDF
SP38H
Monosilicon Pressure Sensor
Download
Related Articles
Meet MICROSENSOR at SPS 2026 2026-10-26
Making CDUs More Efficient: The Role of Pressure and Temperature Monitoring in Liquid Cooling Systems 2026-10-16
Join MICROSENSOR at ECOMONDO 2026 2026-10-12
Reliable Pressure Measurement for Highly Corrosive Fluorochemical Processes 2026-09-29
Contact
Skype: live:xhlforever_2
Related Products
Related Accessories
Anti-corrosive Pressure Sensor
Φ19mm -1bar...0bar~1bar…700bar Tantalum Diaphragm
Details
Anti-corrosive Pressure Sensor
Φ19mm -1bar...0bar~1bar…700bar Titanium Diaphragm
Details
Monosilicon Pressure Sensor
Mono-silicon sensor die Fully-welded construction
Details
Monosilicon Pressure Sensor
High stability piezoresistive sensor die Isolated construction, applicable to measuring various fluid
Details
Valve Manifolds
Suitable for MDM7000 series Shut-off valve, 2/3/5 valve manifold Valve body: 316 SS
Details
Companion Flange
For pipeline equipment connections Easy assembly and replacements Types flange for optional
Details
Flushing Ring
Flushing ring: 316 SS Flange diameter: DN25~DN100, 1-in~4-in
Details
Relate Solutions
Vertical/Horizontal Cryogenic High-Pressure Storage Tank Pressure Monitoring
Pressure transmitters are used not only to measure the pressure inside the tank but also to measure the absolute pressure of the tank body and the pressure before and after the cryogenic pump, ensuring the safe operation of the system. Differential pressure measurement is the most common and reliable method for measuring the liquid level of cryogenic high-pressure bulk storage tanks.
more info...
Thermal Power
In the electric power industry, especially in power plants and transmission systems, it is very important to accurately monitor and control pressure, level, temperature and flow, because these specifications will directly affect the operating efficiency and safety of the system. Micro Sensor's monitoring instrumentation solutions integrate advanced sensor technology and intelligent control systems, which can provide accurate data and efficient control even in complex environments, and optimize the power production and transmission process.
more info...
Reservoir Level Monitoring
Real-time collection of reservoir water level, rainfall, and other information at dam monitoring points. Based on the changes in water level and the maximum capacity of the dam, calculations are made, and warnings and alarms are issued when the water level rises above the alert value.
more info...
Akali Recovery Unit
In the paper industry, the alkali recovery system is an essential part that operates under harsh conditions. The system needs strong pressure, temperature, and flow instrumentation to handle high temperatures, high pressures, and corrosive media.
more info...
MICRO SENSOR CO., LTD
Headquarters
No. 30 Jiangtan West Road, Baoji 721008, Shaanxi, P.R. China
German Subsidiary
Micro Sensor GmbH
Girardetstr. 6, D-45131 Essen, Germany
Enter Verification Code:*
I accept the Micro Sensor Privacy Policy
send information
Products
Pressure Sensors
Pressure Transmitters
Level Transmitters
Temperature Transmitters
Flowmeters
Accessories
Solutions
General Industry
Process Industry
Service Support
Downloads
Applications
About Us
Our Business
Our Team
Our Culture
Authorized Distributor
Customer Service
Copyright © 2026 MICRO SENSOR CO., LTD
Confirm Decline
Hey there! Help us get to know you better.
Got a minute to share your thoughts? Your feedback helps us build something you'll love!
Confirm Close
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SP38H, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Enter Verification Code | * |
| Making CDUs More Efficient | The Role of Pressure and Temperature Monitoring in Liquid Cooling Systems 2026-10-16 |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for SP38H. For a missing document or a specific revision, our experts send it to you.
The SP38H Sensor adopts high-reliability monosilicon technology, with a built-in temperature sensor, which greatly improves the temperature performance.
| Parameter | Value |
|---|---|
| Enter Verification Code | * |
| Making CDUs More Efficient | The Role of Pressure and Temperature Monitoring in Liquid Cooling Systems 2026-10-16 |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Details Monosilicon Pressure Sensor

Details Monosilicon Pressure Sensor

Details Corrosive fluids pressure sensor

Sanitary Pressure Sensor

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SP38H |
| Manufacturer | Microsensor |
Pressure Sensor Modules
LoRaWAN pressure sensor, SS316 transducer · Ref. : LORAWAN-PRESSURE-SENSOR
Price on request
Pressure Sensor Modules
High pressure sensor with digital I²C output · Ref. : MPM283I
Price on request
Pressure Sensor Modules
Thin film hydraulic pressure sensor 0-5 to 2000 bar · Ref. : HPT906
Price on request
Pressure Sensor Modules
Zigbee temperature, humidity and air pressure sensor · Ref. : 6979033600706
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details