The Netvox R313DA LoRaWAN vibration sensor detects vibration and movement and sends the data wirelessly to a LoRaWAN network as a Class A device.
Operating Temperature-20°C to 55 °C
Operating Temperature Range-20°C ~ 55°C
Storage Temperature Range-40°C ~ 85°C
Operating Humidity Range<90%RH (No condensation)
Frequency Range863MHz-928MHz 470MHz-510MHz
Work Voltage RangeDC 2. 4 V to 3.0V
Product overview
Overview. The Netvox R313DA is a wireless LoRaWAN vibration sensor. It detects vibrations and movements with a dual ball type, single direction tilt sensitive trigger switch, then transmits the detected data to other devices over the wireless network.
Main characteristics. The sensor measures 57 mm x 38.05 mm x 15.2 mm and weighs about 45 g. It is powered by 2 x 3.0 V CR2450 button batteries in parallel, 620 mAh each, with a low battery alarm at 2.4 V. Battery voltage measurement accuracy is ± 0.1 V. Its life span is 10,0000 cycles.
Interfaces and connectivity. The R313DA communicates over LoRaWAN (Class A) with LoRa or FSK modulation, one of the two being chosen. Supported bands are EU863-870, US902-928, AU915-928, KR920-923, AS923-1, AS923-2, AS923-3, IN865-867 and CN470-510, the band being configured before shipment. It uses an external antenna. Range reaches 10 km in line of sight and depends on the environment. Receiving sensitivity is -136 dBm in LoRa (spreading factor 12, bit rate 293 bps) and -121 dBm in FSK.
Power and environment. It operates between -20 °C and 55 °C at under 90 %RH without condensation, and can be stored between -40 °C and 85 °C. Standby current is 13 µA at 3 V.
Typical uses. The sensor suits vibration and movement monitoring on remote equipment or structures where a wired connection is not practical.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for R313DA, with where it comes from. Use the filters to find one quickly.
All specifications (32)
Characteristic
Value
Antenna Type
External antenna
Battery Measurement Accuracy
± 0.1V
Communication Distance
Up to 10 km; (visible linear obstacle-free transmission distance, actual transmission distance depends on the environment )
Data Transfer Rate
LoRa: 0.3kbps~50kbps; FSK: 1.2kbps~300kbps
Dimension
57mm x 38.05mm x 15.2mm
Emission current (max)
120mA / 3.0V
Environment Humidity
< 90 %RH (No condensation)
Frequency Range
863MHz-928MHz 470MHz-510MHz
Input power
2 x 3.0V CR2450 button batteries in parallel (The capacity of each CR2450 battery is 620mah.)
Life span
10,0000 cycles
Low Battery Alarm
2.4V
Low Voltage Threshold
2.4V
Modulation
LoRa/FSK (Note: You can choose one of them)
Modulation Method
LoRa/FSK (Note: choose one of them)
Operating Humidity Range
<90%RH (No condensation)
Operating Temperature
-20°C to 55 °C
Operating Temperature Range
-20°C ~ 55°C
Operation Voltage
DC 2.4V to 3.0V
Power supply
2 x 3.0V CR2450 button batteries
Receiving Current (max)
11mA/ 3.0V
Receiving Sensitivity
-136dBm(LoRa,Spreading Factor=12,Bit Rate=293bps );; -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
Sensor Type
Dual ball type single direction tilt sensitive trigger switch
Standby Current
13µA / 3V
Storage Temperature
-40°C to 85 °C
Storage Temperature Range
-40°C ~ 85°C
Supportable LoRaWAN Band
EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,; IN865-867,CN470-510; (Note: The frequency band is optional and needs to be configured before shipment)
The Netvox R313DA LoRaWAN vibration sensor detects vibration and movement and sends the data wirelessly to a LoRaWAN network as a Class A device.
Operating Temperature-20°C to 55 °C
Operating Temperature Range-20°C ~ 55°C
Storage Temperature Range-40°C ~ 85°C
Operating Humidity Range<90%RH (No condensation)
Frequency Range863MHz-928MHz 470MHz-510MHz
2. Datasheet extract (recorded values)
Parameter
Value
Antenna Type
External antenna
Battery Measurement Accuracy
± 0.1V
Communication Distance
Up to 10 km; (visible linear obstacle-free transmission distance, actual transmission distance depends on the environment )
Data Transfer Rate
LoRa: 0.3kbps~50kbps; FSK: 1.2kbps~300kbps
Dimension
57mm x 38.05mm x 15.2mm
Emission current (max)
120mA / 3.0V
Environment Humidity
< 90 %RH (No condensation)
Frequency Range
863MHz-928MHz 470MHz-510MHz
Input power
2 x 3.0V CR2450 button batteries in parallel (The capacity of each CR2450 battery is 620mah.)
Life span
10,0000 cycles
Low Battery Alarm
2.4V
Low Voltage Threshold
2.4V
Modulation
LoRa/FSK (Note: You can choose one of them)
Modulation Method
LoRa/FSK (Note: choose one of them)
Operating Humidity Range
<90%RH (No condensation)
Operating Temperature
-20°C to 55 °C
Operating Temperature Range
-20°C ~ 55°C
Operation Voltage
DC 2.4V to 3.0V
Power supply
2 x 3.0V CR2450 button batteries
Receiving Current (max)
11mA/ 3.0V
Receiving Sensitivity
-136dBm(LoRa,Spreading Factor=12,Bit Rate=293bps );; -121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)
Sensor Type
Dual ball type single direction tilt sensitive trigger switch
Standby Current
13µA / 3V
Storage Temperature
-40°C to 85 °C
Storage Temperature Range
-40°C ~ 85°C
Supportable LoRaWAN Band
EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,; IN865-867,CN470-510; (Note: The frequency band is optional and needs to be configured before shipment)
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -20°C to 55 °C — check it against the installation environment.
Thermal : rated operating range -20°C ~ 55°C — check it against the installation environment.
Applications and use cases
Architectures in which R313DA can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Diseases and water stress are noticed once the crop is already affected. A weather station, soil probes and sensor nodes in the field report conditions through an outdoor gateway
To check
Crops, plots and measurement depth of the soil probes
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
Milesight sensors, LoRaWAN gateways and cellular routers can be brought together on the Milesight Development Platform, which manages the devices and passes their data to other applications through an API and webhooks
To check
Development Platform for device management, API and webhooks, or another network server and application
Devices provisioned through Milesight RPS must have that provisioning removed before being added to the Development Platform
Data flows to the customer’s own application through webhooks
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for R313DA and the other parts of your project.
Answers to the questions that the recorded characteristics of R313DA can answer. A question is not asked when nothing is recorded to answer it.
1Does it support CAN bus?
Yes — recorded under "Modulation": LoRa/FSK (Note: You can choose one of them).
2Does it support LoRaWAN?
Yes — recorded under "Supportable LoRaWAN Band": EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,; IN865-867,CN470-510; (Note: The frequency band is optional and needs to be configured before shipment).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details