Product overview
SOLO CO2 5000 (A1) CO2 sensor from Seeed Studio — The SOLO CO2 5000 (A1) is a digital NDIR (nondispersive infrared) carbon dioxide sensor from Seeed Studio, designed to continuously measure the CO2 concentration in ambient air.
Main characteristics. Measuring range of 400 to 5000 ppm with a resolution of 1 ppm, an accuracy of ± (50ppm+5%*MV) in the 400 to 3000 ppm range, a T90 response time below 5 minutes and a typical warm-up time of 120 s. The poll rate is 1 Hz and the scan interval 1 s.
Interfaces and connectivity. The sensor uses an RS-485 interface and supports Modbus-RTU RS485, Modbus-ASCII RS485 and SDI-12 (v1.4) protocols. The default output is RS485 with slave address 1; SDI-12 output is selected by opening the cover and setting the board button to "1" and "2". The cable length is 2 metres.
Power and environment. The sensor is powered from 5 V to 16 V. Active-mode consumption is 20 mA typical at 16 V and 55 mA typical at 5 V; in sleep mode it falls to about 28 µA at 16 V. It operates from -10 to +50 °C at 0 to 85 % humidity, non-condensing. The protection rating is IPx5; the PTFE filter is not waterproof. The enclosure is made of PC.
Typical uses. With its RS485 port and Modbus-RTU support, the sensor connects to PLCs, data loggers or Arduino, Seeeduino and Raspberry Pi boards through the Grove RS485 module, for indoor air quality monitoring and environmental tracking projects.
Integration. This product is available on quotation from Atlas Electronics.