PIM694
LED Strip Module for Yukon

LED Strip Module for Yukon
Maker, Prototyping, Open-Hardware & Developer Boards
Pimoroni PIM694, listed under “Maker, Prototyping, Open-Hardware & Developer Boards”.
Drive WS2812/Neopixel and APA102/Dotstar addressable RGB LED strips from your Pimoroni Yukon project with this 5V / 5A regulator with level-shifting.
Connect the data-in end of your addressable LED strip up to the module's convenient screw terminals to add colour to your project.
We used this module and some Neon-like RGB LED strip to equip our remote controlled rover with some light-up bling! 🌈
LED strips and connectors are sold separately.
Features
Compatible with 5V WS2812/Neopixel/SK6812 and APA102/Dotstar/SK9822 LEDs
Screw terminals for attaching your LED strip
TPS54A24 step-down converter ( datasheet )
Fixed 5V output
5A continuous current (10A peak)
5V level-shifted clock and data
Temperature and power good sensors
Fully-assembled (no soldering required)
Compatible with Pimoroni Yukon
Software
You can find examples to help you get started driving addressable LED strips with Yukon below, as well as our showcase example for the remote-controlled rover.
MicroPython Library Reference
MicroPython Examples
Showcase Examples
Pinout and Schematic
Download a printable PDF version
Schematic
Notes
Measurements: 24mm x 20mm x 13.7mm (L x W x H).
Two WS2812 strips can be driven off one module, by wiring one strip's data line to the DAT line as normal, and the other to the CLK line. Sneaky!
A maximum of 8 LED strips are supported by Yukon across all modules. Each strip uses a PIO state machine of the RP2040.
About Yukon
Yukon is a high-power modular robotics and engineering platform, built around Raspberry Pi's formidable RP2040 chip. It has slots for attaching interchangeable hardware modules for driving combinations of devices such as motors, servos, steppers, and LED strips, all from one board!
Featuring an XT30 connector, Yukon can be directly powered off 2 to 4 cell LiPo batteries (or any other 5 to 17V source), to deliver up to 15A continuous for your high-power projects. An e-Fuse with switchable output protects the board, along with voltage, current, and temperature sensors that can be monitored by your programs.
View all Yukon!
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for PIM694. For a missing document or a specific revision, our experts send it to you.
Pimoroni PIM694, listed under “Maker, Prototyping, Open-Hardware & Developer Boards”.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
LED Strip Module for Yukon

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | PIM694 |
| Manufacturer | Pimoroni |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details