USR-G806s – Industrial 4G LTE cellular router with RS485 serial port and GPS

Industrial 4G LTE cellular router with RS485 serial port and GPS

Industrial Cellular Routers

  • -20℃~+70℃
  • 1 x SMA-K
  • 1 x 2FF SIM
  • 1 * SMA-K
Manufacturer part number
CELLULAR-NETWORK-ROUTER
Manufacturer
PUSR

Industrial TDD-LTE 4G cellular router with RS485 serial port, GPS and VPN, designed to connect equipment and PLCs to the Internet over a cellular link.

Product overview

Overview. The PUSR USR-G806s industrial cellular router integrates 4G LTE, WiFi, RS485, GPS and VPN technologies to provide reliable and secure Internet connectivity for networked equipment.

Main characteristics. It features a TDD-LTE module on bands B34, B38, B39, B40 and B41, with maximum data rates of 130 Mbps downlink and 50 Mbps uplink, and a 2FF SIM card slot. An active GPS antenna at 1575.42 MHz gives a theoretical positioning accuracy of 2.5 meters, influenced by the number of available satellites.

Interfaces and connectivity. The router provides one WAN port configurable as LAN and one LAN port, both 10/100 Mbps with auto MDI/MDIX and 1.5 kV network isolation transformer protection. The RS485 serial port supports baud rates from 1200 to 230400, with NONE, ODD and EVEN parity and 1 or 2 stop bits. Modbus RTU to TCP support lets serial devices join an IP network, with four TCP and UDP sockets. The WiFi interface follows IEEE 802.11b/g/n in the 2.4 GHz band and operates in AP mode.

Security and remote management. Failover between 4G and WAN ensures automatic switching to the backup connection. VPN protocols PPTP, L2TP, GRE, IPSEC (IKEv1) and OPENVPN, together with a firewall offering DMZ, filtering and access control, protect transmitted data. Configuration is done through the Web interface, and remote management is available via Telnet, SSH, AT commands and SNMP, with alarms by email and SMS and remote access through DDNS domain names.

Power and environment. The router runs from 9 to 36 V DC, with average consumption of 270 mA at 12 V and reverse polarity protection. Its IP30 metal housing supports an operating temperature from -20 °C to +70 °C and can be installed by panel mounting or DIN-rail mounting.

Typical uses. With its RS485 port and Modbus support, it connects PLCs and serial equipment to a remote network, and its GPS allows tracking the position of an asset.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Cellular; Interface — Antenna: 1 x SMA-K
  • Cellular; Interface — Frequency: TDD-LTE: B34/38/39/40/41
  • Cellular Interface — Max. Data Rates: TDD-LTE: 130 Mbps (DL)/50 Mbps (UL)
  • Cellular; Interface — SIM card: 1 x 2FF SIM
  • Device; management — Configuration: Web
  • Device; management — Remote management: Telnet, SSH, AT command,SNMP

Good to know before integrating

  • Thermal: rated operating range -20℃~+70℃ — check it against the installation environment.
  • Recorded network/IO connectivity: IEEE 802.11b/g/n,2.4GHz, AP mode — confirm your host system has the matching driver or protocol stack.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote