USR-G806s-G – Industrial 4G LTE cellular router with GNSS and RS485

Industrial 4G LTE cellular router with GNSS and RS485

Industrial Cellular Routers

  • -20℃~+70℃
  • 1 x SMA-K
  • 1 x 2FF SIM
  • 1 * SMA-K
Manufacturer part number
CELLULAR-NETWORK-ROUTER
Manufacturer
USR IoT

The USR-G806s-G is an industrial 4G LTE cellular router with GNSS, an RS485 serial port and several VPN protocols, for connecting network and serial devices to the Internet.

Product overview

Overview. The USR-G806s-G from USR IoT is an industrial 4G LTE cellular router with GNSS, WiFi and an RS485 serial port, designed to provide reliable and secure Internet connectivity to remote equipment.

Cellular connectivity. The router accepts a 2FF SIM card and supports TDD-LTE on bands B34, B38, B39, B40 and B41, with maximum data rates of 130 Mbps downlink and 50 Mbps uplink. The cellular antenna connects to an SMA female connector. Automatic failover between 4G and the WAN port provides a backup connection.

Interfaces and networking. The router has one WAN port configurable as LAN and one LAN port, both 10/100 Mbps with auto MDI/MDIX and 1.5 kV network isolation transformer protection. It supports static routing, DHCP server, NAT, network diagnostics with Ping, route trace and DNS, and the PPP, PPPoE and DHCP client WAN protocols. The 802.11b/g/n WiFi at 2.4 GHz operates in AP mode, with a transmission distance of 80 meters by line of sight.

Serial port and Modbus. The RS485 port connects through a 3-pin 3.81 mm industrial terminal block. It supports baud rates from 1200 to 230400, parity NONE, ODD and EVEN, and 1 or 2 stop bits. The router performs Modbus RTU to TCP conversion and provides four TCP and UDP sockets, allowing serial devices to be connected to an IP network.

GNSS positioning. An active GNSS antenna on an SMA connector, with a frequency range of 1575.42 MHz, provides the position. The theoretical positioning accuracy is 2.5 meters, influenced by the number of available satellites. Data can be sent in RMC or GGA format to a platform or a TCP/UDP server.

Security and VPN. The router supports PPTP, L2TP, GRE, IPSec (IKEv1) and OpenVPN protocols. It includes a firewall with DMZ, anti-DoS protection, filtering by IP address, domain name or MAC address, port mapping and access control.

Power and environment. Power input is 9 to 36 V DC, with an average working current of 270 mA at 12 V, through a 5.5 x 2.1 mm DC jack or a 2-pin industrial terminal block, with reverse polarity protection. The IP30 metal housing operates from -20 to +70 °C and mounts on a panel or DIN rail. Dimensions are 112 x 84 x 25 mm.

Remote management. Configuration is done through a web interface, Telnet, SSH, AT commands or SNMP. The PUSR platform provides remote monitoring, remote upgrades and alarms by email or SMS, as well as remote access to the router's web pages. A DDNS service and an NTP client complete the management features.

See all specifications

Highlights

  • Cellular; Interface — Antenna: 1 x SMA-K
  • Cellular; Interface — Frequency: TDD-LTE: B34/38/39/40/41
  • Cellular Interface — Max. Data Rates: TDD-LTE: 130 Mbps (DL)/50 Mbps (UL)
  • Cellular; Interface — SIM card: 1 x 2FF SIM
  • Device; management — Configuration: Web
  • Device; management — Remote management: Telnet, SSH, AT command,SNMP

Good to know before integrating

  • Thermal: rated operating range -20℃~+70℃ — check it against the installation environment.
  • Recorded network/IO connectivity: IEEE 802.11b/g/n,2.4GHz, AP mode — confirm your host system has the matching driver or protocol stack.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote