Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

USR-M511 – Modbus RTU/ASCII to Modbus TCP gateway with 2 serial ports

Modbus RTU/ASCII to Modbus TCP gateway with 2 serial ports

Protocol Gateways, Serial Device Servers & CAN Adapters

  • Wi-Fi
  • RS-485
  • Modbus
Manufacturer part number
MODBUS-GATEWAYS-USR-M511_DE
Manufacturer
PUSR

USR-M511 Modbus gateway that polls Modbus RTU/ASCII slaves and answers Modbus TCP master queries, through an RS-232 or RS-485 serial port and a Wi-Fi link.

Product overview

PUSR USR-M511. The USR-M511 Modbus gateway from PUSR converts Modbus RTU/ASCII frames to Modbus TCP. It polls Modbus RTU/ASCII slaves, displays the data on its internal web page and answers queries from a Modbus TCP master.

Main functions. It supports up to 16 masters, can address 8 slaves with a configurable target address, and supports Modbus slave management. It offers two Modbus modes, master and slave.

Connectivity and interfaces. One serial port, RS-232 or RS-485 (not usable at the same time), or RS-422 depending on configuration. The wireless network is 802.11 b/g/n with AP, Station and AP+Station modes, and the network protocol is IPV4 with TCP/UDP. A 10/100 Mbps Ethernet interface with automatic MDI/MDIX and a static or DHCP IP address are also available. The serial baud rate ranges from 300 bps to 460800 bps, with None, Even, Odd, Space and Mark parity, 5 to 8 data bits and 1 or 2 stop bits, with RTS/CTS flow control. A 3 dBi antenna with SMA connector is included, with an 8-pin RJ45 interface.

Power and environment. DC input of 5 to 18 V in the input voltage specification, with a working voltage of DC 5 to 36 V. Working current of 95 mA at 5 V. Operating temperature of -40 to 85 °C, working humidity of 5% to 95%. The housing measures 86 × 81 × 24 mm.

Typical uses. Collecting data from sensors, PLCs and Modbus RTU/ASCII devices connected to an Ethernet network, with supervision through the internal web page.

Integration. Configuration through the built-in web page, computer set-up software or serial AT commands. Range up to 400 m in open horizon with the 3 dBi antenna. Wi-Fi security with WEP 64/128-bit, WPA, WPA2 and 802.11i, with TKIP or AES encryption. Certifications CE, FCC, RoHS and TELEC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote