USR-IO0080/8000/0440/4040/0404 – Modular RS485 Modbus RTU I/O Controller

Modular RS485 Modbus RTU I/O Controller

Distributed I/O Blocks

  • -25℃~+75℃
  • 79.6*28*110mm
  • Level 3, IEC 61000
  • Supported
Manufacturer part number
MODULAR-IO-CONTROLLER
Manufacturer
PUSR
Wide Operating Temp
-25℃~+75℃
Interface
Default: 9600, NONE, 8, 1

Modular I/O controller for DIN-rail or wall mounting, combinable by number of inputs and outputs, for remote control of devices over Modbus RTU.

Product overview

Overview. The PUSR USR-IO modular I/O controller is an expandable remote input and output module that can be combined to obtain the required number of I/O points. It works with PUSR M100 or M300 gateways to enable remote control of I/O devices.

Main characteristics. Opto-isolated digital inputs: logic low detected between 0 and 2 V, logic high detected between 9 and 36 V. Dimensions 79.6 × 28 × 110 mm, or 79.6 × 58 × 110 mm according to the datasheet. Tool-free push-in terminals. Status LEDs for the power supply.

Interfaces and connectivity. Standard RS485 interface with Modbus RTU protocol, Modbus address range 1 to 255, default address 1. Default serial settings: 9600, NONE, 8, 1.

Power and environment. DC 12-24 V power supply. Operating temperature range -25 ℃ to +75 ℃, humidity 5 % to 95 % non-condensing. EMC protection level 3 according to IEC 61000. Hardware watchdog supported.

Typical uses. Industrial data acquisition and control of devices such as switches, buttons, infrared detectors, level or smoke sensors, and two-wire 4-20 mA sensors, wired as described by the manufacturer.

Integration. The module connects directly to a control system compatible with Modbus RTU, which simplifies its integration into an existing automation architecture.

See all specifications

Highlights

  • Dimension: 79.6*28*110mm
  • EMC Protection: Level 3, IEC 61000
  • Hardware Watchdog: Supported
  • Humility: 5%~95% (non-condensing)
  • Interface: Default: 9600, NONE, 8, 1
  • Physical Specification: 79.6*58*110(mm)

Good to know before integrating

  • Thermal: rated operating range -25℃~+75℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Distributed I/O Blocks
Request a quote