USR-IO808
8-channel Ethernet and WiFi network I/O controller with RS485

- Operating temperature
- -40 ~ 85°C
- Frequency Range
- 2.412 GHz ~ 2.484 GHz
- Range
- 100 meters in open area
- Transmission range
- Max 200m (open horizon, 3dbi antenna)
8-channel Ethernet and WiFi network I/O controller with RS485
The PUSR USR-IO808 is an 8-channel distributed network I/O controller with Ethernet, WiFi and RS485 connectivity, designed for remote control and monitoring of loads.
Overview. The PUSR USR-IO808 is a distributed input/output block, listed by the manufacturer as USR-IO808-EWR, that enables remote control of loads over a wired or wireless network. It is powered from 12 V to 36 V and operates between -20 °C and +70 °C.
Connectivity. The module provides a 10/100M LAN interface, a 10/100M WAN/LAN interface and an 802.11b/g/n WiFi link in the 2.412 GHz to 2.484 GHz band, with AP and Station network modes. The serial port supports RS485 with baud rates from 300 bps to 3M bps, and the TCP Client transmission mode is supported.
Protocols and configuration. The controller automatically recognises Modbus TCP and Modbus RTU frames on the network side and responds in the same format as the received request. It can work in master mode, to control several Modbus RTU devices in RS485 cascade, or in slave mode, the default, where it can be queried simultaneously from the network and from RS485. Configuration is possible through the built-in webpage, serial or network AT commands, and Modbus RTU commands.
Inputs and outputs. Digital inputs are dry contact inputs activated by shorting DI and COM. DO outputs switch up to 10 A at AC 220 V or DC 28 V.
Power and environment. The enclosure measures 200 x 122 x 29 mm. Storage temperature ranges from -40 °C to +85 °C and operating humidity from 5% to 95%.
Typical uses. The module suits remote monitoring and control of loads or sensors, for example temperature and humidity monitoring in an agricultural greenhouse, depending on the Modbus configuration chosen.
Integration and protection. Protections include lightning protection, 2 kV anti-surge protection on RS485, electrostatic discharge (ESD) immunity level 4 to IEC61000-4-2 and surge immunity level 3 to IEC61000-4-5. It is certified CE, FCC and RoHS.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for USR-IO808, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Operating temperature | -40 ~ 85°C |
| Antenna | 2.4G WiFi antenna |
| Antenna interface | External: I-PEX connector; Internal: on-board antenna |
| Application Software | Support configuration software |
| Baud rate | 300 bps ~ 3M bps |
| Buffer | Receive 1K bytes |
| Certificate | CE/FCC/ROHS |
| Check Bit | None, Even, Odd, Space, Mark |
| Configuration | Built-in webpage, serial AT command, network AT command |
| Configuration command | Modbus RTU |
| Data Bits | 5, 6, 7, 8 |
| Data interface | Serial port: Support RS485.; Baud rate: 300bps~230400bps |
| Data Transmission Mode | Support TCP Client |
| DI input | Dry contact input, just needing to short-circuit DI and COM |
| Dimension | 200*122*29mm |
| DNS | Support |
| DO output | AC 220V 10A; DC 28V 10A |
| ESD | IEC61000-4-2, Level 4 |
| Flow Control | RTS / CTS |
| Frequency Range | 2.412 GHz ~ 2.484 GHz |
| Group pulse | IEC61000-4-4, Level 3 |
| Input Voltage | DC 3.0 ~ 3.6 V |
| Interface Standard | TTL: 3.3V |
| Main Frequency | 80MHz |
| Network Mode | AP / Station |
| Network Protocol | Modbus TCP, Modbus RTU |
| Networking | UsrLink: “USR” defined module networking mode; SimpleLink: onekey networking provided by TI |
| Processor | TI CC3200 (Cortex-M4 core) |
| Range | 100 meters in open area |
| Receive sensitivity | –94.7 dBm @ 1 DSSS; –87.0 dBm @ 11 DSSS; –73.0 dBm @ 54 OFDM |
| Security mechanism | Security: WEP-A / WPA-PSK / WPA2-PSK; Encryption: WEP64 / WEP128 / TKIP / AES |
| Size | 18.22 x 26.65 x 2.8mm |
| Standard | Support 802.11b/g/n |
| Stop Bit | 1, 2 |
| Storage humidity | 1%~95% |
| Storage Temp | -40 ~ 125°C, 5 ~ 95% RH |
| Storage Temperature | -40℃ ~ +85℃ |
| Surge | IEC61000-4-5, Level 3 |
| Transmission range | Max 200m (open horizon, 3dbi antenna) |
| Transmission Rate | 802.11b: 11 Mbps; 802.11g: 54 Mbps; 802.11n: 54 Mbps |
| Transmit Power | 17.0 dBm @ 1 DSSS; 17.25 dBm @ 11 CCK; 13.5 dBm @ 54 OFDM |
| Virtual Serial Software (USR-VCOM) | Windows 2000 or higher (32bit/64bit) |
| Wired LAN interface | 10/100M LAN interface |
| Wired WAN/LAN interface | 10/100M WAN/LAN interface |
| Work Mode | Master mode, slave mode |
| Working current | AP: 70mA; STA: 18mA; Peak: 247mA |
| Working humidity | 5%~95% |
| Working temperature | -20℃ ~ +70℃ |
| Working voltage | 12V~36V |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for USR-IO808. For a missing document or a specific revision, our experts send it to you.
The PUSR USR-IO808 is an 8-channel distributed network I/O controller with Ethernet, WiFi and RS485 connectivity, designed for remote control and monitoring of loads.
| Parameter | Value |
|---|---|
| Operating temperature | -40 ~ 85°C |
| Antenna | 2.4G WiFi antenna |
| Antenna interface | External: I-PEX connector; Internal: on-board antenna |
| Application Software | Support configuration software |
| Baud rate | 300 bps ~ 3M bps |
| Buffer | Receive 1K bytes |
| Certificate | CE/FCC/ROHS |
| Check Bit | None, Even, Odd, Space, Mark |
| Configuration | Built-in webpage, serial AT command, network AT command |
| Configuration command | Modbus RTU |
| Data Bits | 5, 6, 7, 8 |
| Data interface | Serial port: Support RS485.; Baud rate: 300bps~230400bps |
| Data Transmission Mode | Support TCP Client |
| DI input | Dry contact input, just needing to short-circuit DI and COM |
| Dimension | 200*122*29mm |
| DNS | Support |
| DO output | AC 220V 10A; DC 28V 10A |
| ESD | IEC61000-4-2, Level 4 |
| Flow Control | RTS / CTS |
| Frequency Range | 2.412 GHz ~ 2.484 GHz |
| Group pulse | IEC61000-4-4, Level 3 |
| Input Voltage | DC 3.0 ~ 3.6 V |
| Interface Standard | TTL: 3.3V |
| Main Frequency | 80MHz |
| Network Mode | AP / Station |
| Network Protocol | Modbus TCP, Modbus RTU |
| Networking | UsrLink: “USR” defined module networking mode; SimpleLink: onekey networking provided by TI |
| Processor | TI CC3200 (Cortex-M4 core) |
| Range | 100 meters in open area |
| Receive sensitivity | –94.7 dBm @ 1 DSSS; –87.0 dBm @ 11 DSSS; –73.0 dBm @ 54 OFDM |
| Security mechanism | Security: WEP-A / WPA-PSK / WPA2-PSK; Encryption: WEP64 / WEP128 / TKIP / AES |
| Size | 18.22 x 26.65 x 2.8mm |
| Standard | Support 802.11b/g/n |
| Stop Bit | 1, 2 |
| Storage humidity | 1%~95% |
| Storage Temp | -40 ~ 125°C, 5 ~ 95% RH |
| Storage Temperature | -40℃ ~ +85℃ |
| Surge | IEC61000-4-5, Level 3 |
| Transmission range | Max 200m (open horizon, 3dbi antenna) |
| Transmission Rate | 802.11b: 11 Mbps; 802.11g: 54 Mbps; 802.11n: 54 Mbps |
| Transmit Power | 17.0 dBm @ 1 DSSS; 17.25 dBm @ 11 CCK; 13.5 dBm @ 54 OFDM |
| Virtual Serial Software (USR-VCOM) | Windows 2000 or higher (32bit/64bit) |
| Wired LAN interface | 10/100M LAN interface |
| Wired WAN/LAN interface | 10/100M WAN/LAN interface |
| Work Mode | Master mode, slave mode |
| Working current | AP: 70mA; STA: 18mA; Peak: 247mA |
| Working humidity | 5%~95% |
| Working temperature | -20℃ ~ +70℃ |
| Working voltage | 12V~36V |
Points to check before using USR-IO808 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Input Voltage | DC 3.0 ~ 3.6 V |
| Transmit Power | 17.0 dBm @ 1 DSSS; 17.25 dBm @ 11 CCK; 13.5 dBm @ 54 OFDM |
| Working current | AP: 70mA; STA: 18mA; Peak: 247mA |
| Working voltage | 12V~36V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of USR-IO808 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Data interface": Serial port: Support RS485.; Baud rate: 300bps~230400bps.
Yes — recorded under "Configuration command": Modbus RTU.
Yes — recorded under "Antenna": 2.4G WiFi antenna.
Yes — recorded under "Antenna": 2.4G WiFi antenna.
-40 ~ 85°C (source: Operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
8-channel Ethernet and WiFi network I/O controller with RS485


Modular IO Controller

Aber ein caro valo!

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | USR-IO808 |
| Manufacturer | PUSR |
Distributed I/O Blocks
4-relay network I/O controller with Modbus RTU/TCP · Ref. : USR-IO424T
Price on request
Distributed I/O Blocks
Modular RS485 Modbus RTU I/O Controller · Ref. : MODULAR-IO-CONTROLLER
Price on request
Distributed I/O Blocks
Modular distributed I/O controller with RS485 interface · Ref. : MODULAR-IO-CONTROLLER_DE
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details