USR-N520 – Modbus MQTT dual-port serial to Ethernet gateway

Modbus MQTT dual-port serial to Ethernet gateway

Protocol Gateways, Serial Device Servers & CAN Adapters

  • -40~85℃
  • 7, 8
  • None, Even, Odd
  • 2.2KΩ
Manufacturer part number
N520
Manufacturer
PUSR

Secure 2-port RS232/485/422 to Ethernet serial device server with Modbus RTU/TCP gateway and MQTT client for connecting serial devices to a TCP/IP network.

Product overview

Main functions. The product provides bidirectional transmission between serial devices and the network. It converts Modbus RTU to Modbus TCP, supports multi-host polling and Modbus address mapping for up to 128 data points.

Addressing can be static IP or DHCP. The product supports IP, TCP, UDP, ARP, ICMP, IPv4, DHCP and DNS protocols, as well as UDP broadcast and WebSocket.

Operating modes. Four modes are available: TCP server, TCP client, UDP and HTTP client, the latter submitting serial data by GET or POST methods. The MQTT client and SSL/TLS encryption in TCP client, HTTP client and MQTT modes protect data exchanges.

Serial parameters. Baud rates from 600 to 230.4K bps, 7 or 8 data bits, parity None, Even or Odd, and flow control None, RTS/CTS (RS-232 only) or XON/XOFF. A 2.2KΩ pull-up and pull-down resistor is provided on the RS-485 interface.

Power and environment. Input voltage DC 5.0 to 36.0 V, input current 67 mA at 12 V, with reverse polarity protection. Operating temperature -40 to 85 ℃, operating humidity 5% to 95% RH non-condensing. EMC protection: ESD IEC 61000-4-2 level 4, EFT IEC 61000-4-4 level 3, surge IEC 61000-4-5 level 3. Certifications CE, FCC and RoHS.

Integration. The 150 × 98.8 × 30 mm housing (L × W × H, including terminals and mounting ears) is designed for panel mounting. Configuration is possible by setup utility, webpage or AT commands.

See all specifications

Highlights

  • Hardware; Parameters — Certifications: CE/FCC/ROSH
  • Hardware; Parameters — Dimensions: 150*98.8*30 mm (L*W*H, including terminals and mounting ears)
  • Hardware; Parameters — Input Current: 67mA @12V
  • Hardware; Parameters — Input Voltage: DC 5.0~36.0V
  • Hardware; Parameters — Installation: Panel mounting
  • Hardware; Parameters — Operating Humidity: 5%~95% RH(non-condensing)

Good to know before integrating

  • Thermal: rated operating range -40~85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote