RAK13006 – CAN Bus interface module with MCP2518FD controller

CAN Bus interface module with MCP2518FD controller

Maker, Prototyping, Open-Hardware & Developer Boards

  • -40° C ~ 85° C
  • MCP2518FD
  • ATA6563
Manufacturer part number
100099
Manufacturer
RAKwireless
Operating Temperature
-40° C ~ 85° C
Microchip (CAN Controller)
MCP2518FD

The RAK13006 is a CAN Bus interface module in the WisBlock format, based on the MCP2518FD CAN controller and the ATA6563 transceiver. It connects a microcontroller to a high speed CAN bus.

Product overview

Overview. The RAKwireless RAK13006 is a CAN Bus interface module from the modular WisBlock family. It uses the Microchip MCP2518FD CAN controller and the Microchip ATA6563 CAN transceiver, and transmits data over differential signals on the bus.

Main characteristics. The module supports high speed CAN up to 1 Mbit/s, with an arbitration bit rate up to 1 Mbps, and both ISO 11898-2 and ISO 11898-3 modes. It measures 25 x 35 x 1 mm.

Interfaces and connectivity. The module communicates with the host microcontroller over the SPI bus, using the SPI_CS, SPI_CLK, SPI_MISO and SPI_MOSI signals, together with the interrupt pins INT0 and INT1 and the CLKO-SF output.

Power and environment. The module is powered at 3.3 V and operates from -40 °C to 85 °C. Supply voltage ranges are 2.7 to 5.5 V for VDD and 4.5 to 5.5 V for VCC. Active current is 15 mA nominal and 20 mA maximum, and sleep current is 15 µA nominal and 60 µA maximum.

Typical uses. CAN Bus is used in cars, trucks and building automation. The module suits prototyping and the development of nodes connected to this type of bus.

Integration. The module fits a WisBlock system and connects to the microcontroller through the SPI bus and the interrupt pins.

See all specifications

Highlights

  • Microchip (CAN Controller): MCP2518FD
  • Microchip (CAN PHY Transceiver): ATA6563
  • Model: RAK13006
  • Operating Temperature: -40° C ~ 85° C

Good to know before integrating

  • Thermal: rated operating range -40° C ~ 85° C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote