WisBlock sensor module RAK12037 measuring CO2 concentration in air by dual-channel NDIR technology, with integrated temperature and humidity.
Temperature rangeValue: -40° C ~ 70° C
Humidity rangeValue: 0% ~ 100% RH
Measurement Range400 ppm – 10.000 ppm
Temperature measurement range-40° C ~ 70° C
Supply voltage3.3V
Current consumption19 mA @ 1 meas. per 2 s
Product overview
Overview. The RAK12037 is an NDIR CO2 sensor from RAKwireless, based on the Sensirion SCD30 sensor and designed for the WisBlock modular platform. It measures carbon dioxide concentration in air using dual-channel NDIR technology, and a temperature and humidity sensor is integrated on the same module.
Main characteristics. The CO2 measurement range covers 400 ppm to 10,000 ppm, with an accuracy of ±(30 ppm + 3%). Temperature is measured from -40 °C to 70 °C and humidity from 0% to 100% RH. The module measures 25 x 50 x 1 mm.
Interfaces and connectivity. The module communicates over I2C, with I2C1_SDA and I2C1_SCL on its connector, as well as a PWM/RDY pin.
Power and environment. The module is powered at 3.3 V, within a supply voltage range of 3.3 V to 5.5 V, and draws 19 mA at one measurement per 2 s.
Typical uses. The sensor is used in HVAC equipment, air purifiers and smart home applications.
Integration. The module fits the RAKwireless WisBlock platform through its modular connector.
Points to check before using 100102 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Powerplan for a supply compatible with 3.3V.
Power and communication
Current consumption
19 mA @ 1 meas. per 2 s
Supply voltage
3.3V
Voltage supply
Value: 3.3 V ~ 5.5 V
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Power : plan for a supply compatible with 3.3V.
Applications and use cases
Architectures in which 100102 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Offices and classrooms get stuffy without anyone measuring why. Indoor air quality monitoring places CO2, VOC and particle sensors in the rooms and reports their values through a gateway, so ventilation can be adjusted to real occupancy
To check
Parameters to measure (CO2 alone or CO2, VOC and particles)
Battery-powered sensors or mains-powered sensors with display
Integration with the ventilation control or building management system
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
To check
Data model and building plans available
Software platform hosting the twin
Sensor density needed for a useful model
Associated system blocks
SensorsMetersGateways
Need a complete solution?
Send a request for 100102 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
100102
NDIR CO2 sensor with temperature and humidity for WisBlock
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details