WisBlock CO2 sensor module based on the Sensirion STC31, measuring high CO2 concentrations from 0 to 100 vol% by thermal conductivity, for CO2 monitoring in N2 and in air.
Calibrated forCO2 in N 2 and CO 2 in Air
ModelRAK12008
Repeatability0.2 vol%
Resolution16 bit
SensirionSTC31
Temperature stability0.025 vol%
Product overview
Overview. The RAKwireless RAK12008 is a CO2 sensor in WisBlock module format, based on the Sensirion STC31 thermal conductivity sensor. It measures CO2 concentrations from 0 to 100 vol% and is calibrated for CO2 in N2 and CO2 in air.
Performance. Accuracy is 0.5 vol% + 3% of measured value from 0 to 25 vol%, and 1 vol% + 3% of measured value from 0 to 100 vol%. Repeatability is 0.2 vol%, resolution 16 bit and temperature stability 0.025 vol%. The module includes a built-in temperature sensor.
Power and consumption. Operating voltage ranges from 2.7 V (min.), 3.3 V (nom.) to 5.5 V (max.). Current is 3 mA nominal and 5 mA maximum when measuring, 50 uA nominal in idle state and 1 uA maximum in sleep mode.
Connectivity and integration. The module communicates over I2C and uses the WisBlock pin layout. Its dimensions are 10 mm x 10 mm. Tutorials and example code are provided by the manufacturer.
WisBlock CO2 sensor module based on the Sensirion STC31, measuring high CO2 concentrations from 0 to 100 vol% by thermal conductivity, for CO2 monitoring in N2 and in air.
Calibrated forCO2 in N 2 and CO 2 in Air
ModelRAK12008
Repeatability0.2 vol%
Resolution16 bit
SensirionSTC31
2. Datasheet extract (recorded values)
Parameter
Value
3V3_S
Description: Operating Voltage; Condition: Input voltage must within this range; Min.: 2.7; Nom.: 3.3; Max.: 5.5; Unit: V
Accuracy (based on Measured Range )
0.5 vol% + 3% of measured value ( from 0 to 25 vol% ); 1 vol% + 3% of measured value ( from 0 to 100 vol% )
Calibrated for
CO2 in N 2 and CO 2 in Air
IDD1
Description: Current on 3V3_S; Condition: Measuring; Min.: -; Nom.: 3; Max.: 5; Unit: mA
IDD2
Description: Current on 3V3_S; Condition: Idle state; Min.: -; Nom.: 50; Max.: -; Unit: uA
IDD3
Description: Current on 3V3_S; Condition: Sleep mode; Min.: -; Nom.: -; Max.: 1; Unit: uA
Model
RAK12008
Repeatability
0.2 vol%
Resolution
16 bit
Sensirion
STC31
Temperature stability
0.025 vol%
Applications and use cases
Architectures in which 100206 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Offices and classrooms get stuffy without anyone measuring why. Indoor air quality monitoring places CO2, VOC and particle sensors in the rooms and reports their values through a gateway, so ventilation can be adjusted to real occupancy
To check
Parameters to measure (CO2 alone or CO2, VOC and particles)
Battery-powered sensors or mains-powered sensors with display
Integration with the ventilation control or building management system
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
To check
Data model and building plans available
Software platform hosting the twin
Sensor density needed for a useful model
Associated system blocks
SensorsMetersGateways
Need a complete solution?
Send a request for 100206 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
100206
WisBlock CO2 Sensor, Thermal Conductivity, 0 to 100 vol%
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details