RAK18060 – WisBlock Microphone & SD Kit with 5.6 W Stereo Amplifier

WisBlock Microphone & SD Kit with 5.6 W Stereo Amplifier

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
110128
Manufacturer
RAKwireless

WisBlock audio playback and capture kit combining a RAK18060 5.6 W stereo amplifier, a RAK18031 PDM microphone and a RAK18003 interposer with SD card slot.

Product overview

Overview. The RAK18060 is a stereo amplifier from RAKwireless for WisBlock modules, intended for playing precompiled audio files. It is part of the microphone and SD card kit, which includes the RAK18003 audio interposer with SD card slot, the RAK18031 PDM microphone board and the screws and cables needed to stack the modules.

Main characteristics. The amplifier is based on the Texas Instruments TAS2560. Its maximum output power is 3.7 W nominal into 8 Ω, with a 3 A current limit, at 1% THD+N. The measured THD+N at 1 kHz for 3 W output into an 8 Ω load is 0.0043%, and the signal-to-noise ratio reaches 110.6 dB.

Interfaces and connectivity. The board uses the I2S bus for audio, with the I2S_DO, I2S_DI, I2S_WS and I2S_BCLK signals, and the I2C1 bus for configuration. It connects to the WisBlock platform through its pin connectors.

Power and environment. The digital supply voltage is 3.3 V nominal, the extra supply EX_POWER is 5 V nominal, and the USB or POE supply VBUS of 5 V nominal is provided by the WisBase board. The operating temperature range is -40 to +85 ℃.

Typical uses. Playback of precompiled sound messages or alerts on a WisBlock node. The SD card is for logging or configuration, not for audio playback or recording.

Integration. The modules are mounted in a simple stack. A base board and a WisCore module are required to use the kit.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote