RAK9105U – LoRaWAN Remote Reboot Switch with Controlled DC Outputs

LoRaWAN Remote Reboot Switch with Controlled DC Outputs

Industrial Wireless I/O

  • -30° C to +75° C
  • 12V DC
  • 0-95%RH non-condensing
  • -40° C to +85° C
Manufacturer part number
215010
Manufacturer
RAKwireless
Operating Temperature
-30° C to +75° C
DC Input Voltage
12V DC

The RAK9105U is a LoRaWAN power controller that remotely cuts and restores power to gateways, routers or IP cameras through downlink commands.

Product overview

Overview. The RAKwireless RAK9105U is a LoRaWAN remote reboot switch, a power control device that cuts and restores power through downlink commands over a LoRaWAN network. It is intended for gateways, LTE routers, IP cameras and WiFi access points installed at hard-to-reach sites.

Main characteristics. It is built around the RAK3172 module (STM32-based chipset), with LoRaWAN 1.0.3 compatibility, Class C operation and OTAA activation. It is configurable through RUI3 and WisToolBox, and supports the EU868, IN865, RU864, AU915, US915, KR920 and AS923-1/2/3/4 frequency bands.

Interfaces and connectivity. The LoRa antenna is built in, with an optional external antenna via IPEX connector. A 4-pin terminal block provides the 12 VDC input and the optional RS485 link (A and B) to a RAK Battery Plus or another RS485-enabled system.

Power and environment. 12 VDC input, efficiency above 70%. Three outputs: one always-on 12 V/2 A output, one MCU-controlled 12 V/2 A output and one MCU-controlled 5 V/3 A USB Type-C output. The PMMA housing suits indoor use, with an operating range of -30 °C to +75 °C and 0 to 95 % RH non-condensing humidity.

Typical uses. Remote restart of network equipment without a site visit, without requiring a SIM or WiFi connection, and integration with a compatible LoRaWAN network server.

See all specifications

Highlights

  • Frequency band: 8XX MHz for EU868/RU864/IN865
  • A: Connect to RS485+ of Battery Plus
  • Activation Mode: OTAA (Over-The-Air Activation)
  • B: Connect to RS485- of Battery Plus
  • Casing: PMMA housing supports use in various environments
  • Chipset: RAK3172 (STM32-based)

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -30° C to +75° C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Industrial Wireless I/O
Request a quote