RAK9105U – LoRaWAN Remote Reboot Switch with DC and USB-C Outputs

LoRaWAN Remote Reboot Switch with DC and USB-C Outputs

Industrial Wireless I/O

  • -30° C to +75° C
  • 12V DC
  • 0-95%RH non-condensing
  • -40° C to +85° C
Manufacturer part number
216010
Manufacturer
RAKwireless
Operating Temperature
-30° C to +75° C
DC Input Voltage
12V DC

The RAK9105U is a RAKwireless LoRaWAN remote power control switch that lets you reboot a gateway, router or IP camera remotely through downlink commands.

Product overview

Overview. The RAKwireless RAK9105U is a LoRaWAN remote reboot switch, a DC switching controller that cuts and restores power to connected equipment using LoRaWAN downlink commands. It is intended for gateways, LTE routers, IP cameras and WiFi access points installed where direct access is difficult.

Main characteristics. The LoRaWAN RAK3172 module, based on an STM32 chipset, provides low-power communication and Class C operation. The firmware uses the RUI3 framework and is configured through WisToolBox. The PMMA housing is designed for indoor use.

Interfaces and connectivity. A built-in LoRa antenna is included, with an optional MHF connector, and an external antenna can be connected through an IPEX connector. The product is compatible with LoRaWAN 1.0.3, uses OTAA activation and supports the EU868, IN865, RU864, AU915, US915, KR920 and AS923-1/2/3/4 bands. An RS485 port on a 4-pin terminal block allows communication with a RAK Battery Plus (RAK9155).

Power and environment. The input is 12 VDC, via a DC jack or terminal block. Outputs comprise one always-on 12 V/2 A output, one MCU-controlled 12 V/2 A output and one MCU-controlled 5 V/3 A USB Type-C output. Efficiency is above 70%. The operating temperature range is -30 °C to +75 °C, and humidity from 0 to 95% RH non-condensing.

Typical uses. Remote restart of equipment without direct access, reducing site visits, with power management across distributed deployments.

Integration. The product works with compatible LoRaWAN network servers, including TTN, ChirpStack and RAK Built-in NS.

See all specifications

Highlights

  • Frequency band: 9XX MHz for US915/AU915/KR920/AS923
  • A: Connect to RS485+ of Battery Plus
  • Activation Mode: OTAA (Over-The-Air Activation)
  • B: Connect to RS485- of Battery Plus
  • Casing: PMMA housing supports use in various environments
  • Chipset: RAK3172 (STM32-based)

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -30° C to +75° C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Industrial Wireless I/O
Request a quote