Product overview
Overview. The RAK4630 from RAKwireless pairs a Nordic nRF52840 microcontroller with BLE 5.0 and a Semtech SX1262 LoRa transceiver, in the version without MHF1 connector where the antenna connects through the RF pinout. It is intended for EU433 applications and supports LoRaWAN 1.0.3 and LoRa point-to-point communication.
Main characteristics. The SX1262 can transmit at up to +22 dBm, with a link budget up to 170 dB. The module includes a temperature-controlled crystal oscillator (TXCO) for correct operation across a wide range of temperatures and bandwidths. It complies with Class A, Class B and Class C of LoRaWAN 1.0.3.
Interfaces and connectivity. The module provides UART, I2C, SPI, ADC, USB and GPIO interfaces. It can be configured with AT commands over UART or BLE, and its firmware is based on RUI3, with an API for writing custom firmware.
Power and consumption. The module is designed for battery-powered operation. At 3.3 V over 10 seconds, its average current is 4.23 µA in LoRaWAN One-Time Sleep and 4.42 µA in One-Time Sleep. When transmitting a 15-byte frame at 3.6 V, its average current is 67.8 mA.
Typical uses. Smart meters, supply chain and logistics tracking, agricultural sensors and smart cities, where long-range data acquisition and low power consumption are required.
Integration. The module is programmed and configured through its serial ports and SPI interface, and the SX1262 signals (BUSY, DIO1, NRESET, NSS, SCK, MOSI, MISO) are available on the pinout.