RAK4200 – LoRa LPWAN Module 433 MHz with STM32L071 and SX1276

LoRa LPWAN Module 433 MHz with STM32L071 and SX1276

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 ~ 3.6V
  • EU433
  • 15 x 15.5 x 2.5 mm
Manufacturer part number
311024
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 ~ 3.6V

RAK4200 LPWAN LoRa module for the EU433 band, combining an STM32L071 microcontroller and an SX1276 transceiver for long-range, low-power data acquisition networks.

Product overview

RAK4200 RAKwireless. LPWAN LoRa module for the EU433 band — The RAK4200 is a compact LoRa module measuring 15 x 15.5 x 2.5 mm, combining an ARM 32-bit Cortex M0+ with MPU STM32L071 microcontroller and an SX1276 LoRa transceiver. It is intended for long-range, low-power data acquisition applications.

Main characteristics. The module operates in the EU433 frequency band and is powered from 2.0 to 3.6 V. Its consumption is 1.08 µA in sleep at 2.0 V and 8.66 µA typical at 3.3 V for the EU868 band, and 15 mA in LoRa receive mode at 37.5 kbps. LoRa output power reaches 19 dBm with a consumption of 120 mA. It integrates 128 KB of flash memory with ECC and 20 KB of RAM.

Interfaces and connectivity. The module provides a UART2 interface for AT commands, an I2C interface and GPIO pins. It complies with LoRaWAN 1.0.2 and supports LoRa point-to-point communication. It is supplied without MHF connector, the antenna being connected through the RF pinout.

Power and environment. Operating temperature range from -40 °C to +85 °C. The module is CE and FCC certified.

Typical uses. Smart city, smart agriculture and smart industry applications, sensor networks and long-range data acquisition.

Integration. SMT mounting on printed circuit board through a 20-pin stamp pad. A breakout board with pins transferred to 2.54 mm headers is also available for development and testing.

See all specifications

Highlights

  • Frequency band: EU433
  • Supply voltage: 2.0 ~ 3.6V
  • Certifications: CE, FCC
  • Compact Form Factor: 15 x 15.5 x 2.5 mm
  • Connector: Without MHF (Antenna via RF Pinout)
  • Core: ARM 32-bit Cortex M0+ with MPU

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 ~ 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote