RAK4200 – STM32L071 and SX1276 LoRaWAN module with MHF connector

STM32L071 and SX1276 LoRaWAN module with MHF connector

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 ~ 3.6V
  • RU864
  • 15 x 15.5 x 2.5 mm
Manufacturer part number
313017
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 ~ 3.6V

RAK4200 LoRaWAN module in a compact 15 x 15.5 mm form factor, with an STM32L071 MCU and SX1276 chip, designed for long-range, low-power radio communication.

Product overview

Overview. The RAKwireless RAK4200 is a sub-GHz LoRaWAN module, model RAK4200, built around an STM32L071 microcontroller (ARM 32-bit Cortex M0+ core with MPU) and an SX1276 LoRa transceiver. It is offered in the RU864 band and fitted with an MHF connector, the RF pinout being disconnected on this version.

Main characteristics. The module has a compact 15 x 15.5 x 2.5 mm form factor and is mounted by SMT on a printed circuit board. It operates from a supply voltage of 2.0 to 3.6 V and over a temperature range of -40 °C to +85 °C. It is certified CE and FCC.

Power consumption. In LoRa transmit mode at 17 dBm, consumption is 87 mA, and 120 mA at 19 dBm. In LoRa receive mode at 37.5 kbps, it is 15 mA. In sleep mode, measured at 3.3 V, consumption is 8.66 µA for the EU868 band, 9.40 µA for US915 and 7.88 µA for CN470.

Interfaces and connectivity. The module provides a UART2 interface for AT commands, an I2C interface and GPIO pins. It supports LoRa point-to-point communication.

Typical uses. With its UART and I2C interfaces, the module can be integrated into sensors and long-range, low-power data acquisition systems on LoRaWAN networks.

Integration. The SWDIO and SWCLK programming pins ease firmware development. The RAK4200 firmware version is v3.2.0.16.

See all specifications

Highlights

  • Frequency band: RU864
  • Supply voltage: 2.0 ~ 3.6V
  • Certifications: CE, FCC
  • Compact Form Factor: 15 x 15.5 x 2.5 mm
  • Connector: With MHF (RF Pinout is disconnected)
  • Core: ARM 32-bit Cortex M0+ with MPU

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 ~ 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote