Product overview
Overview. The RAK811 from RAKwireless is an IN865 band LoRa module, a LPWAN device built around the Semtech SX1276 and mounted on a Xbee form factor breakout board with standard 2.00 mm headers.
Main characteristics. The module supports the complete LoRaWAN 1.0.2 stack, with OTAA or ABP activation, as well as LoRa Point-to-Point communications. Output power is adjustable from 5 to 20 dBm, with a typical value of 14 dBm, and maximum sensitivity reaches -130 dBm at 0.3 kbps. Current consumption is 30 mA in transmission at 14 dBm and 5.5 mA in reception.
Interfaces and connectivity. The module is configured through AT commands over the UART1 interface, which is also used for firmware updates. It provides GPIO and ADC pins, a boot mode pin and SWD debug pins, and integrates both SMA and MHF antenna connectors.
Power and environment. The VCC supply is 3.3 V typical, within a range of 2.1 V to 3.45 V. The module operates between -40 °C and 85 °C with industrial grade rating, and storage is specified over the same temperature range, non-condensing. The breakout board measures 42 mm x 25 mm and weighs 0.02 kg.
Typical uses. This module suits battery-powered sensor nodes, private LoRa point-to-point links, or LPWAN equipment connected to a microcontroller over UART. It is certified CE, FCC, KC, RoHS and TELEC.
Available on quotation from Atlas Electronics.