RAK4600 – LoRa and Bluetooth 5 module for LoRaWAN, IN865 band

LoRa and Bluetooth 5 module for LoRaWAN, IN865 band

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 ~ 3.6V
  • IN865
  • CE, FCC
Manufacturer part number
314020
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 ~ 3.6V

The RAK4600 is a RAKwireless LPWAN module combining an nRF52832 MCU, an SX1276 LoRa chip and Bluetooth 5 connectivity. It targets low-power IoT applications.

Product overview

Overview. The RAK4600 from RAKwireless is a LoRa and Bluetooth 5 module for LoRaWAN, integrating an nRF52832 MCU and an SX1276 LoRa chip. It is offered in the IN865 frequency band and covers the entire LoRa high band from 863 to 923 MHz.

Main characteristics. The module complies with LoRaWAN 1.0.2 protocols and also supports LoRa point-to-point communications. Its LoRa transmit power reaches 20 dBm and its BLE transmit power reaches 4 dBm. Sleep consumption is 13.3 µA, dropping to 11.2 µA at 2.0 V. The module also supports Bluetooth 5 (transmit power from -20 to +4 dBm in 4 dB steps) and can operate with a bandwidth from 7.8 kHz to 500 kHz.

Interfaces and connectivity. The module provides UART, I2C and GPIO ports, with an optional NFC interface. A Serial Wire Debug (SWD) interface is available, along with an SPI1 bus and DIO0 to DIO4 pins dedicated to the radio. The VCTL1 and VCTL2 pins control the RF switch between transmit and receive modes.

Power and environment. The module operates from a supply voltage of 2.0 to 3.6 V and works between -40 °C and +85 °C. It has 512 KB of Flash memory and 64 KB of RAM. It is CE and FCC certified.

Typical uses. Thanks to its LoRa and Bluetooth radio performance, the RAK4600 suits IoT applications such as smart cities, smart agriculture, smart industry, sensor networks and personal area networks.

Integration. The module integrates into an existing system through its UART, I2C and SPI interfaces. A breakout board with 2.54 mm headers facilitates development and testing.

See all specifications

Highlights

  • Frequency band: IN865
  • Supply voltage: 2.0 ~ 3.6V
  • Certifications: CE, FCC
  • DIO0: P0.27
  • DIO1: P0.28
  • DIO2: P0.29

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 ~ 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote