RAK4260 – Sub-GHz LoRa module with low power and UART, I2C, SPI interfaces

Sub-GHz LoRa module with low power and UART, I2C, SPI interfaces

Sub-GHz Modules

  • 17mA (typical)
  • EU868
  • CE, FCC
  • -136dBm
Manufacturer part number
315029
Manufacturer
RAKwireless
Rx Current
17mA (typical)
Frequency band
EU868

RAK4260 LoRa module from RAKwireless, integrating an ARM Cortex-M0+ MCU and a LoRa transceiver, intended for LoRaWAN end nodes in the EU868 band.

Product overview

Overview. The RAKwireless RAK4260 is a sub-GHz LoRa module of SiP type based on Microchip's ATSAMR34J18B, combining in a compact package a 32-bit ARM Cortex-M0+ microcontroller and a LoRa transceiver. The product is listed for the EU868 frequency band.

Main characteristics. The module delivers a maximum transmit power of 20 dBm and reaches a maximum sensitivity of -136 dBm at SF12 with a 125 kHz bandwidth. Its typical receive current is 17 mA. In sleep mode, its consumption is 860 nA with a backup voltage of 3.3 V. Its dimensions are 15 mm x 15 mm x 2.0 mm.

Interfaces and connectivity. The module provides a set of configurable interfaces, including I2C, SPI, UART and 12-bit ADC, along with GPIO pins and SWDIO and SWCLK programming pins. The supported wireless technology is LoRa, with LoRaWAN compatibility for end nodes.

Power and consumption. Measured consumptions are 13.6 mA in LoRa reception at 37.5 kbps, 33.1 mA in transmission at 14 dBm in RFO_HF, 95.6 mA at 17 dBm and 126.3 mA at 20 dBm in PA_BOOST, all at 3.3 V.

Typical uses. With its UART, I2C and SPI interfaces and its low sleep consumption, the RAK4260 suits integration into battery-powered LoRaWAN sensor nodes.

Integration. The module is certified CE and FCC. The manufacturer indicates that the RAK4260 is no longer in production and recommends the RAK3172, which has the same form factor, for future designs. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Frequency band: EU868
  • A rich selection of interfaces: I2C, SPI, ADC, UART, GPIOs
  • Certifications: CE, FCC
  • Max Sensitivity (SF12 BW125kHz): -136dBm
  • Max Tx Power: 20dBm
  • Model: RAK4260

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote