RAK4200 – LoRa US915 LPWAN Module with STM32L071 MCU and SX1276

LoRa US915 LPWAN Module with STM32L071 MCU and SX1276

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 ~ 3.6V
  • US915
  • 15 x 15.5 x 2.5 mm
Manufacturer part number
316038
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 ~ 3.6V

RAK4200 LPWAN module from RAKwireless, integrating an STM32L071 MCU and an SX1276 LoRa transceiver, designed for US915 LoRaWAN networks with low power consumption.

Product overview

Overview. The RAKwireless RAK4200 is a compact LPWAN module integrating an ARM 32-bit Cortex M0+ STM32L071 MCU and an SX1276 LoRa transceiver, designed for US915 LoRaWAN networks.

Main characteristics. The module measures 15 x 15.5 x 2.5 mm, with a connector without MHF, the antenna being connected via the RF pinout. It operates from a supply voltage of 2.0 to 3.6 V and over a temperature range of -40 °C to +85 °C. Its consumption is 1.14 µA minimum and 9.40 µA typical in the US915 condition at 3.3 V.

Interfaces and connectivity. The module provides a UART2 interface for AT commands, an I2C interface and GPIO pins. It supports LoRa wireless technology, complying with the LoRaWAN 1.0.2 specification and LoRa point-to-point communications.

Power and environment. Transmit consumption is 87 mA at 17 dBm and 120 mA at 19 dBm in PA_BOOST mode. Receive consumption is 15 mA at 37.5 kbps. The product is certified CE and FCC.

Typical uses. The module suits long-range, low-power data acquisition applications, notably in Smart City, Smart Agriculture and Smart Industry settings.

Integration. The referenced RAK4200 firmware version is v3.2.0.16. The module is surface-mounted on a printed circuit board using its 20 pins.

See all specifications

Highlights

  • Frequency band: US915
  • Supply voltage: 2.0 ~ 3.6V
  • Certifications: CE, FCC
  • Compact Form Factor: 15 x 15.5 x 2.5 mm
  • Connector: Without MHF (Antenna via RF Pinout)
  • Core: ARM 32-bit Cortex M0+ with MPU

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 ~ 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote