RAK4200 – LoRa LPWAN Module 868-923 MHz AU915, UART I2C GPIO

LoRa LPWAN Module 868-923 MHz AU915, UART I2C GPIO

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 ~ 3.6V
  • AU915
  • 15 x 15.5 x 2.5 mm
Manufacturer part number
317038
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 ~ 3.6V

RAK4200 LPWAN module built around an STM32L071 and an SX1276, designed for low-power long-range LoRa data acquisition in Smart City, agriculture and industrial applications.

Product overview

RAKwireless RAK4200 LoRa module. The RAK4200 LPWAN module from RAKwireless combines an STM32L071 microcontroller and an SX1276 LoRa transceiver in a compact 15 x 15.5 x 2.5 mm form factor, designed for surface mounting on a printed circuit board.

Main characteristics. This version is configured for the AU915 band and has no MHF connector, the antenna being connected through the RF pinout. The module supports LoRaWAN 1.0.2 protocols and LoRa point-to-point communications. Its operating temperature range is -40°C to +85°C and its supply voltage is 2.0 to 3.6 V.

Interfaces and connectivity. The module provides UART, I2C and GPIO ports. A UART2 interface dedicated to AT commands allows configuration of the module, and the I2C pins can be used to connect sensors.

Power and consumption. In LoRa transmit mode at 17 dBm, consumption is 87 mA, and 120 mA at 19 dBm. In LoRa receive mode at 37.5 kbps, it is 15 mA. In sleep, typical consumption is 8.66 μA at 3.3 V for the EU868 band, 9.40 μA for US915 and 7.88 μA for CN470.

Certifications. The module is CE and FCC certified.

Typical use. Thanks to its low consumption and long-range capability, this module suits remote sensor data acquisition in smart city, connected agriculture and industrial automation applications.

Integration. The module is mounted via a 20-pin stamp pad on the PCB, and the documented AT firmware version is v3.2.0.16.

See all specifications

Highlights

  • Frequency band: AU915
  • Supply voltage: 2.0 ~ 3.6V
  • Certifications: CE, FCC
  • Compact Form Factor: 15 x 15.5 x 2.5 mm
  • Connector: Without MHF (Antenna via RF Pinout)
  • Core: ARM 32-bit Cortex M0+ with MPU

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 ~ 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote