RAK811 – AS923 LoRa breakout module with GPIO and UART

AS923 LoRa breakout module with GPIO and UART

Sub-GHz Modules

  • AS923
  • 42mm x 25mm
  • -130dBm@0.3kps
  • 5-20dBm adjustable
Manufacturer part number
319000
Manufacturer
RAKwireless
Frequency band
AS923
Breakout Board Dimensions
42mm x 25mm

RAK811 LoRa module in breakout board form for the AS923 band, intended for low-power LPWAN nodes controlled by AT commands.

Product overview

Overview. The RAKwireless RAK811 AS923 is a sub-GHz LoRa module usable as an LPWAN node on the AS923 frequency band. It is supplied as a 42 mm x 25 mm breakout board with GPIO access through headers.

Radio characteristics. The module offers a maximum sensitivity of -130 dBm at 0.3 kbps and an adjustable output power from 5 to 20 dBm. Consumption is 30 mA in transmission at 14 dBm and 5.5 mA in reception.

Interfaces and connectivity. A UART1 interface handles AT commands and firmware updates. The pins include GPIO and ADC inputs/outputs, two SWD debug pins, an active-low reset input and a boot mode enable pin.

Power and environment. The VCC supply accepts 2.1 to 3.45 V, typically 3.3 V. The operating temperature range is -40 °C to 85 °C, industrial grade, and the storage temperature range is the same, non-condensing.

Typical uses. This module suits sensor data transmission over a LoRa network, controlled by a microcontroller or PLC through the UART and AT commands.

Integration. The board is supplied with connection pins and a sub-GHz antenna. Certifications: CE, FCC, KC, RoHS, TELEC. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Frequency band: AS923
  • Breakout Board Dimensions: 42mm x 25mm
  • Certifications: CE, FCC, KC, RoHS, TELEC
  • Max sensitivity: -130dBm@0.3kps
  • Model: RAK811
  • Operating Temperature: -40°C ~ 85°C (industrial grade)

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40°C ~ 85°C (industrial grade) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote