RAK10715 – LTE-M NB-IoT LoRaWAN IoT Device, Arduino IDE Compatible

LTE-M NB-IoT LoRaWAN IoT Device, Arduino IDE Compatible

Maker, Prototyping, Open-Hardware & Developer Boards

  • 4G LTE
  • LTE-M
  • NB-IoT
Manufacturer part number
415004
Manufacturer
RAKwireless

Multi-protocol RAKwireless IoT device combining LoRaWAN, Bluetooth Low Energy and LTE-M/NB-IoT, programmable with the Arduino IDE, supplied without enclosure or battery.

Product overview

Overview. The RAK10715 is a RAKwireless IoT device of the Link.ONE type, combining LoRaWAN, Bluetooth 5.0 and LTE CAT M1 and CAT NB2 cellular communication on one board, for the 800MHz version for EU868/RU864/IN865. It is supplied without Unify enclosure and without battery.

Main characteristics. The Nordic nRF52840 microcontroller, a 32-bit ARM Cortex-M4F at 64 MHz with 1 MB Flash and 256 KB RAM, works with the Semtech SX1262 transceiver for the LoRa/LoRaWAN radio layer and the Quectel BG77 module for cellular connectivity. The BG77 is programmed with the Quectel AT command set and offers GNSS location (GPS, GLONASS, BeiDou, Galileo, QZSS).

Interfaces and connectivity. The nRF52840 provides I2C and SPI buses, analog inputs and digital inputs and outputs. The BG77 communicates with the nRF52840 over UART. The device accepts a Nano SIM or eSIM and has SMA and MHF connectors for external antennas. LTE CAT M1 throughput reaches 588 kbps downlink and 1119 kbps uplink.

Power and environment. Standard voltage of 3.7 V, charging at 500 mA from 4.5 V to 5.5 V, discharge up to 2 A. Operating temperature range from -35 °C to +75 °C and storage range from -40 °C to +80 °C.

Integration. Compatible with the WisBlock modular ecosystem, the device accepts plug-in sensors and is programmable with the Arduino IDE, which simplifies prototyping and IoT solution development. Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote