RAK10715 – LTE-M, NB-IoT and LoRaWAN IoT device with IP65 enclosure and battery

LTE-M, NB-IoT and LoRaWAN IoT device with IP65 enclosure and battery

Maker, Prototyping, Open-Hardware & Developer Boards

  • 500 mA
  • 2 A
  • 600 - 6000 MHz
  • Specifications: 0±10
Manufacturer part number
416005
Manufacturer
RAKwireless
Charging current
500 mA
Discharge current
2 A

The RAK10715 is a RAKwireless multi-protocol IoT device combining LoRaWAN, Bluetooth 5.0, LTE-M and NB-IoT, programmable with the Arduino IDE. It ships with an IP65 enclosure and a 3200 mAh rechargeable battery.

Product overview

Overview. The RAK10715 from RAKwireless is an IoT device (Link.ONE) integrating the Nordic nRF52840 microcontroller, the Semtech SX1262 LoRa transceiver and the Quectel BG77 cellular module. It comes with a Unify IP65 enclosure and a battery, in the 900 MHz version for the US915, AU915, KR920 and AS923 bands.

Main characteristics. The nRF52840 is a 32-bit ARM Cortex-M4F MCU running at 64 MHz, with 1 MB of Flash and 256 KB of RAM. The device supports LoRaWAN stack V1.0.2 across all official regions. It is programmable with the Arduino IDE and is based on the modular WisBlock ecosystem, which accepts plug-in sensors.

Interfaces and connectivity. The BG77 module communicates with the nRF52840 over UART and is programmed with the Quectel AT command set. It supports CAT M1 and CAT NB2 and offers GNSS location (GPS, GLONASS, BeiDou, Galileo, QZSS). It accepts a Nano SIM or eSIM and provides MHF connectors for external LTE and GPS antennas, as well as SMA connectors. Bluetooth Low Energy is compliant with BLE 5.0, with a maximum transmit power of 8 dBm and a receive sensitivity of -95 dBm at 1 Mbps.

Power and environment. The 3200 mAh rechargeable battery is certified IEC 62133-2:2017. Charging takes place at 4.5 V to 5.5 V with a current of 500 mA, and discharge can reach 2 A. The operating temperature range is -35 °C to +75 °C. The Unify enclosure measures 100 x 75 x 38 mm and is rated IP65.

Typical uses. The device suits prototyping and development of IoT solutions based on LoRaWAN, LTE-M or NB-IoT, with USB access for programming and an external LTE antenna.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • BLE Data Rate: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps
  • BLE Protocol: BLE 5.0
  • BLE Rx Sensitivity: 95 dBm @ 1 Mbps BLE mode
  • BLE Tx Power: 8 dBm max
  • Capacity: As required

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote