LX200V50 – 1000 Mbps PLC evaluation board with AU power plug

1000 Mbps PLC evaluation board with AU power plug

Maker, Prototyping, Open-Hardware & Developer Boards

  • 4.75 V~36 V
  • Input
  • Input/Output
  • 1000Mbps
Manufacturer part number
500024
Manufacturer
RAKwireless
DC interface
4.75 V~36 V
I
Input

The RAKwireless WisLink PLC LX200V50 EVB is a power line communication evaluation board based on the Qualcomm QCA7550 SoC, bridging Ethernet 802.3 networks over the power line at up to 1000 Mbps.

Product overview

Overview. The RAKwireless LX200V50 EVB is a power line communication (PLC) evaluation board based on the Qualcomm QCA7550 SoC. It bridges multi-stream Ethernet content from the power line network to an Ethernet 802.3 network, with a PLC-specific MAC that manages network access and service flows to maximize quality of service.

Main characteristics. Maximum data rate of 1000 Mbps, usable without user configuration. Up to 8 modules can interface with each other. 128-bit AES encryption of data with key management. Works below the CATV signal interference range.

Standards and modes. HomePlug AV2 compliant (30 MHz and 67 MHz MIMO and SISO profiles), IEEE 1901, IEEE 1905.1 and HomePlug AV compliant. OFDM modulation at 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO, HS-ROBO and Mini-ROBO, with 2x2 MIMO and beam-forming. Turbo forward error correction with decoder rates 1/2, 16/21 and 8/9. Power Save Mode. Priority-based CSMA/CA channel access, integrated QoS enhancements, hardware packet classifiers for ToS, CoS and IP port number, and IGMP managed multicast support.

Interfaces and power. RJ45 port and power line connector. Power via USB Type C or barrel jack connector, supply range 4.75 V to 36 V, AU standard power plug. Internal DDR2 memory of 16 MB. Operating temperature range -40 °C to 80 °C.

Use. Board designed for product development, testing and R&D on Ethernet over power line links.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • DC interface: 4.75 V~36 V
  • I: Input
  • I/O: Input/Output
  • Max. data rate: 1000Mbps
  • NC: No connect
  • O: Output

Good to know before integrating

  • Thermal: rated operating range Symbol: Ta; Min.: -40; Typ.: 25; Max.: 80; Unit: ° C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote