LX200V50 – 1000 Mbps HomePlug AV2 Powerline Evaluation Board

1000 Mbps HomePlug AV2 Powerline Evaluation Board

Maker, Prototyping, Open-Hardware & Developer Boards

  • 4.75 V~36 V
  • Input
  • Input/Output
  • 1000Mbps
Manufacturer part number
500025
Manufacturer
RAKwireless
DC interface
4.75 V~36 V
I
Input

RAKwireless LX200V50 EVB powerline communication (PLC) evaluation board, HomePlug AV2 compliant, for product development, testing and R&D.

Product overview

Overview. The RAKwireless LX200V50 EVB is a power line communication (PLC) evaluation board based on the Qualcomm QCA7550 SoC, designed for product development, testing and R&D. It bridges multi-stream Ethernet content from a power line network to an Ethernet 802.3 network, with a PLC-specific MAC managing network access and service flows.

Main characteristics. Maximum data rate of 1000 Mbps, usable without user configuration. Up to 8 modules can interface with each other. 128-bit AES data encryption. HomePlug AV2 compliant (30 MHz and 67 MHz MIMO and SISO profiles), IEEE 1901, IEEE 1905.1 and HomePlug AV compliant, with Power Save Mode. Internal DDR2 16 MB memory.

Interfaces and connectivity. RJ45 Ethernet connector and power line connector. Supports RGMII/RMII Ethernet in both MAC and PHY mode. Turbo decoder rates: 1/2, 16/21, 8/9. Integrated quality of service with hardware packet classifiers for Type of Service (ToS), Class of Service (CoS) and IP port number, and support for IGMP managed multicast sessions.

Power and environment. Powered via USB Type C or barrel jack connector, supply input range 4.75 V to 36 V, UK standard power plug. Operating temperature -40 °C to 80 °C; storage temperature -40 °C to 150 °C.

Pinout. The 16-pin connector provides MIMO differential TX/RX pairs for channels 0 and 1, a zero cross detection input (ZC_INP) and two ground pins (GND). Other pins are not connected.

Integration. Suited to validating powerline designs and developing multi-node power line networks, available on quotation from Atlas Electronics.

See all specifications

Highlights

  • DC interface: 4.75 V~36 V
  • I: Input
  • I/O: Input/Output
  • Max. data rate: 1000Mbps
  • NC: No connect
  • O: Output

Good to know before integrating

  • Thermal: rated operating range Symbol: Ta; Min.: -40; Typ.: 25; Max.: 80; Unit: ° C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote