900442
Indoor PoE backup UPS for Edge gateways

- Operating Temperature
- -10 to 55 ˚C
- Power consumption
- 12 W (typical)
- Operating Frequency
- ISM band: 2.412~2.472 GHz
- Dimensions
- 66x127x36 mm
Indoor PoE backup UPS for Edge gateways
Indoor PoE backup UPS for RAK7268 Series Edge gateways, with built-in lithium battery, 48 V PoE output and 9 V to 12 V barrel jack outputs.
RAKwireless RAK7268 PoE backup UPS 900442 — This mini DC UPS provides backup power for RAK7268 Series gateways, in the PoE version for indoor use. Main characteristics — Built-in lithium battery with a rated capacity of 29.6 Wh, with protections against over-charge, over-discharge, over-current and short circuit, charging from 110 to 240 V AC. Outputs — IEEE 802.3af PoE output of 48 V DC at 0.23 A, barrel jack outputs of 9 V to 12 V at 3 A and 5 V at 1.5 A. Input power: 12 V DC at 1 A, or PoE (IEEE 802.3af) at 36 to 57 V DC. Typical consumption of 12 W. Dimensions 66 x 127 x 36 mm, weight 0.3 kg, IP30 ingress protection, wall mounting, operating temperature -10 to 55 °C. Supplied with a UK Standard plug. Compatibility — Compatible with RAK7268 Series gateways, including the RAK7268V2, RAK7289V2 and RAK7240V2. Integration — LEDs indicate the status of power, Ethernet, LoRa, Wi-Fi and LTE. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for 900442, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 66x127x36 mm |
| Antenna | LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna |
| Breathing LED | Breathing after system up |
| Cellular | Supports Quectel EG95-E/EG95-NA (IoT/M2M -optimized LTE Cat 4 Module); EG95-E for EMEA Region; - LTE FDD: B1/B3/B7/B8/B20/B28A; - WCDMA: B1/B8; - GSM/EDGE: B3/B8; EG95-NA for North America Region; - LTE FDD: B2/B4/B5/B12/B13; - WCDMA: B2/B4/B5; Optional supports other PCIe LTE module for Global Region |
| Compatible Products | Indoor PoE power supply for RAK7268 Series |
| Computing | MT7628, DDR2 RAM 128 MB |
| Console | Type-C USB |
| Country Code Setup | Network: 802.1q; Management: Firmware update |
| Data logger | Network: Router module NAT; Management: Configuring the LoRa Packet Forwarder |
| Dimension | 166x127x36 mm |
| EG95-E for EMEA Region | LTE FDD: B1/B3/B7/B8/B20/B28A; WCDMA: B1/B8; GSM/EDGE: B3/B8 |
| EG95-NA for North America Region | LTE FDD: B2/B4/B5/B12/B13; WCDMA: B2/B4/B5; Optional supports other PCIE LTE module for Global Region |
| Enclosure Material | Plastic |
| ETH | RJ45 (10/100 M) |
| ETH LED | ON - Linkup; OFF - Linkdown; Flicker - Data transmitting and receiving |
| Ingress Protection | IP30 |
| Installation Method | Wall mounting |
| LEDs | POWER LED; Breathing LED (Top side); ETH LED (On ETH connector); LoRa LED; WLAN LED; LTE LED |
| Location Setup | Network: LTE APN setup; Management: OpenVPN, Ping Watch Dog |
| LoRa Feature | SX1302 Mini PCIe card; 8 Channels; RX Sensitivity: -139 dBm (Min); TX Power: 27 dBm (Max); Frequency: EU433/CN470/EU868/US915/AS923/AU915/IN865/KR920 |
| LoRa LED | ON - LoRa is working; OFF - LoRa is not working; Flicker - Indicate LoRa Packet receiving and sending |
| LoRa package forward | Network: Uplink backup; Management: SSH2 |
| LTE LED | Slow Flicker (1800 ms High / 200 ms Low) - Network searching; Slow flicker (200 ms High / 1800 ms Low) - Idle; Fast flicker (125 ms High / 125 ms Low) - Ongoing data transfer |
| Model | RAK7268 |
| Operating Frequency | ISM band: 2.412~2.472 GHz |
| Operating Temperature | -10 to 55 ˚C |
| Operation channels | 2.4 GHz: 1-13; 19 dBm @1 Mbps; 19 dBm @11 Mbps; 802.11g; 18 dBm @6 Mbps; 16 dBm @54 Mbps; 802.11n (2.4G); 18 dBm @MCS0 (HT20); 16 dBm @MCS7 (HT20); 17 dBm @MCS0 (HT40); 15 dBm @MCS7 (HT40) |
| Power Cable | UK Standard |
| Power consumption | 12 W (typical) |
| Power supply | DC 12 V - 1 A; PoE (IEEE 802.3 af), 36~57 V DC |
| PWR LED | Power indicator - The LED is on when device power is on |
| Receiver Sensitivity | -139 dBm (Min) |
| Receiver Sensitivity (Typical) | 802.11b; -95 dBm @1 Mbps; -88 dBm @11 Mbps; 802.11g; -90 dBm @6 Mbps; -75 dBm @54 Mbps; 802.11n (2.4G); -89 dBm @MCS0 (HT20); -72 dBm @MCS7 (HT20); -86 dBm @MCS0 (HT40); -68 dBm @MCS7 (HT40) |
| Server Address and Port Setup | Management: MQTT Bridge |
| Statistics | Network: Firewall; Management: Build-in Server |
| Supports class A, C | Network: Wi-Fi AP mode; Management: WEB management |
| Transmit Power | 27 dBm (Max) |
| TX Power Setup | Network: DHCP Server/Client; Management: NTP |
| Weight | 0.3 kg |
| Wi-Fi Feature | Frequency: 2.4 GHz (802.11b/g/n); RX Sensitivity: -95 dBm (Min); TX Power: 20 dBm (Max); Operation channels: 2.4 GHz: 1-13 |
| Wireless Standard | IEEE 802.11b/g/n |
| WLAN LED | AP Mode:; -ON - The AP is up; -OFF - The AP is down; -Flicker - Data receiving and sending; STA Mode:; -Slow flicker (1 Hz) - Disconnected; -ON - Connected; -Flicker - Data receiving and sending |
No specification matches.
Last verification : 2026-10-31
Official documents and the technical data recorded for 900442. For a missing document or a specific revision, our experts send it to you.
Indoor PoE backup UPS for RAK7268 Series Edge gateways, with built-in lithium battery, 48 V PoE output and 9 V to 12 V barrel jack outputs.
| Parameter | Value |
|---|---|
| Dimensions | 66x127x36 mm |
| Antenna | LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna |
| Breathing LED | Breathing after system up |
| Cellular | Supports Quectel EG95-E/EG95-NA (IoT/M2M -optimized LTE Cat 4 Module); EG95-E for EMEA Region; - LTE FDD: B1/B3/B7/B8/B20/B28A; - WCDMA: B1/B8; - GSM/EDGE: B3/B8; EG95-NA for North America Region; - LTE FDD: B2/B4/B5/B12/B13; - WCDMA: B2/B4/B5; Optional supports other PCIe LTE module for Global Region |
| Compatible Products | Indoor PoE power supply for RAK7268 Series |
| Computing | MT7628, DDR2 RAM 128 MB |
| Console | Type-C USB |
| Country Code Setup | Network: 802.1q; Management: Firmware update |
| Data logger | Network: Router module NAT; Management: Configuring the LoRa Packet Forwarder |
| Dimension | 166x127x36 mm |
| EG95-E for EMEA Region | LTE FDD: B1/B3/B7/B8/B20/B28A; WCDMA: B1/B8; GSM/EDGE: B3/B8 |
| EG95-NA for North America Region | LTE FDD: B2/B4/B5/B12/B13; WCDMA: B2/B4/B5; Optional supports other PCIE LTE module for Global Region |
| Enclosure Material | Plastic |
| ETH | RJ45 (10/100 M) |
| ETH LED | ON - Linkup; OFF - Linkdown; Flicker - Data transmitting and receiving |
| Ingress Protection | IP30 |
| Installation Method | Wall mounting |
| LEDs | POWER LED; Breathing LED (Top side); ETH LED (On ETH connector); LoRa LED; WLAN LED; LTE LED |
| Location Setup | Network: LTE APN setup; Management: OpenVPN, Ping Watch Dog |
| LoRa Feature | SX1302 Mini PCIe card; 8 Channels; RX Sensitivity: -139 dBm (Min); TX Power: 27 dBm (Max); Frequency: EU433/CN470/EU868/US915/AS923/AU915/IN865/KR920 |
| LoRa LED | ON - LoRa is working; OFF - LoRa is not working; Flicker - Indicate LoRa Packet receiving and sending |
| LoRa package forward | Network: Uplink backup; Management: SSH2 |
| LTE LED | Slow Flicker (1800 ms High / 200 ms Low) - Network searching; Slow flicker (200 ms High / 1800 ms Low) - Idle; Fast flicker (125 ms High / 125 ms Low) - Ongoing data transfer |
| Model | RAK7268 |
| Operating Frequency | ISM band: 2.412~2.472 GHz |
| Operating Temperature | -10 to 55 ˚C |
| Operation channels | 2.4 GHz: 1-13; 19 dBm @1 Mbps; 19 dBm @11 Mbps; 802.11g; 18 dBm @6 Mbps; 16 dBm @54 Mbps; 802.11n (2.4G); 18 dBm @MCS0 (HT20); 16 dBm @MCS7 (HT20); 17 dBm @MCS0 (HT40); 15 dBm @MCS7 (HT40) |
| Power Cable | UK Standard |
| Power consumption | 12 W (typical) |
| Power supply | DC 12 V - 1 A; PoE (IEEE 802.3 af), 36~57 V DC |
| PWR LED | Power indicator - The LED is on when device power is on |
| Receiver Sensitivity | -139 dBm (Min) |
| Receiver Sensitivity (Typical) | 802.11b; -95 dBm @1 Mbps; -88 dBm @11 Mbps; 802.11g; -90 dBm @6 Mbps; -75 dBm @54 Mbps; 802.11n (2.4G); -89 dBm @MCS0 (HT20); -72 dBm @MCS7 (HT20); -86 dBm @MCS0 (HT40); -68 dBm @MCS7 (HT40) |
| Server Address and Port Setup | Management: MQTT Bridge |
| Statistics | Network: Firewall; Management: Build-in Server |
| Supports class A, C | Network: Wi-Fi AP mode; Management: WEB management |
| Transmit Power | 27 dBm (Max) |
| TX Power Setup | Network: DHCP Server/Client; Management: NTP |
| Weight | 0.3 kg |
| Wi-Fi Feature | Frequency: 2.4 GHz (802.11b/g/n); RX Sensitivity: -95 dBm (Min); TX Power: 20 dBm (Max); Operation channels: 2.4 GHz: 1-13 |
| Wireless Standard | IEEE 802.11b/g/n |
| WLAN LED | AP Mode:; -ON - The AP is up; -OFF - The AP is down; -Flicker - Data receiving and sending; STA Mode:; -Slow flicker (1 Hz) - Disconnected; -ON - Connected; -Flicker - Data receiving and sending |
Points to check before using 900442 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power Cable | UK Standard |
| Power consumption | 12 W (typical) |
| Power supply | DC 12 V - 1 A; PoE (IEEE 802.3 af), 36~57 V DC |
| Transmit Power | 27 dBm (Max) |
| TX Power Setup | Network: DHCP Server/Client; Management: NTP |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of 900442 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Antenna": LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna.
Yes — recorded under "Antenna": LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna.
Yes — recorded under "Console": Type-C USB.
-10 to 55 ˚C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Indoor PoE backup UPS for Edge gateways

PoE backup UPS for RAK Edge Gateway with PoE output — Indoor PoE power supply for RAK7268 Series / EU Standard

PoE backup UPS for RAK Edge Gateway with PoE output — Indoor PoE power supply and Lightning Protection for RAK7289/RAK7240 Series / US Standard

PoE backup UPS for RAK Edge Gateway with PoE output — Indoor PoE power supply and Lightning Protection for RAK7289/RAK7240 Series / EU Standard

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 900442 |
| Family | PoE backup UPS for RAK Edge Gateway with PoE output |
| Manufacturer | RAKwireless |
DC UPS
Indoor PoE backup UPS with lightning protection for LoRa gateway
Price on request
DC UPS
Indoor PoE backup UPS for LoRa gateway
Price on request
DC UPS
Mini UPS with 12V DC output · Ref. : 920415
Price on request
DC UPS
Backup PoE power supply for indoor LoRaWAN gateway
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details