920419
Indoor PoE backup power supply for LoRaWAN gateway

- Operating Temperature
- -10 to 55 ˚C
- Power consumption
- 12 W (typical)
- Operating Frequency
- ISM band: 2.412~2.472 GHz
- Dimensions
- 66x127x36 mm
Indoor PoE backup power supply for LoRaWAN gateway
RAKwireless PoE backup UPS with built-in lithium battery, designed to keep RAK7268 indoor gateways powered. PoE output 36 to 57 V DC.
Overview. The RAKwireless POE-03 PoE backup UPS is an indoor backup power supply for the RAKwireless RAK7268 Edge gateway. It integrates a lithium battery to ensure power continuity of the LoRaWAN gateway. Main characteristics — 29.6 Wh lithium battery with protection against over-charge, over-discharge, over-current and short circuit. Trickle, constant current, constant voltage and recovery charging. Mains supply 110 to 240 V AC. Power and outputs — DC 12 V - 1 A or PoE IEEE 802.3 af input, 36 to 57 V DC. Typical power consumption 12 W. EU Standard power cable. Environment — IP30 ingress protection, operating temperature -10 to 55 °C, plastic enclosure, wall mounting. Indicators — power LED, breathing LED, Ethernet LED, LoRa LED, WLAN LED and LTE LED. Connectivity — RJ45 Ethernet port 10/100 M, RP-SMA female LoRa antenna connector, internal LTE and Wi-Fi antennas, Type-C USB console. Typical uses — Keeping a RAK7268 gateway in service during a mains outage at an indoor site powered over PoE. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for 920419, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 66x127x36 mm |
| Antenna | LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna |
| Breathing LED | Breathing after system up |
| Cellular | Supports Quectel EG95-E/EG95-NA (IoT/M2M -optimized LTE Cat 4 Module); EG95-E for EMEA Region; - LTE FDD: B1/B3/B7/B8/B20/B28A; - WCDMA: B1/B8; - GSM/EDGE: B3/B8; EG95-NA for North America Region; - LTE FDD: B2/B4/B5/B12/B13; - WCDMA: B2/B4/B5; Optional supports other PCIe LTE module for Global Region |
| Compatible Products | Indoor PoE power supply for RAK7268 Series |
| Computing | MT7628, DDR2 RAM 128 MB |
| Console | Type-C USB |
| Country Code Setup | Network: 802.1q; Management: Firmware update |
| Data logger | Network: Router module NAT; Management: Configuring the LoRa Packet Forwarder |
| Dimension | 166x127x36 mm |
| EG95-E for EMEA Region | LTE FDD: B1/B3/B7/B8/B20/B28A; WCDMA: B1/B8; GSM/EDGE: B3/B8 |
| EG95-NA for North America Region | LTE FDD: B2/B4/B5/B12/B13; WCDMA: B2/B4/B5; Optional supports other PCIE LTE module for Global Region |
| Enclosure Material | Plastic |
| ETH | RJ45 (10/100 M) |
| ETH LED | ON - Linkup; OFF - Linkdown; Flicker - Data transmitting and receiving |
| Ingress Protection | IP30 |
| Installation Method | Wall mounting |
| LEDs | POWER LED; Breathing LED (Top side); ETH LED (On ETH connector); LoRa LED; WLAN LED; LTE LED |
| Location Setup | Network: LTE APN setup; Management: OpenVPN, Ping Watch Dog |
| LoRa Feature | SX1302 Mini PCIe card; 8 Channels; RX Sensitivity: -139 dBm (Min); TX Power: 27 dBm (Max); Frequency: EU433/CN470/EU868/US915/AS923/AU915/IN865/KR920 |
| LoRa LED | ON - LoRa is working; OFF - LoRa is not working; Flicker - Indicate LoRa Packet receiving and sending |
| LoRa package forward | Network: Uplink backup; Management: SSH2 |
| LTE LED | Slow Flicker (1800 ms High / 200 ms Low) - Network searching; Slow flicker (200 ms High / 1800 ms Low) - Idle; Fast flicker (125 ms High / 125 ms Low) - Ongoing data transfer |
| Model | RAK7268 |
| Operating Frequency | ISM band: 2.412~2.472 GHz |
| Operating Temperature | -10 to 55 ˚C |
| Operation channels | 2.4 GHz: 1-13; 19 dBm @1 Mbps; 19 dBm @11 Mbps; 802.11g; 18 dBm @6 Mbps; 16 dBm @54 Mbps; 802.11n (2.4G); 18 dBm @MCS0 (HT20); 16 dBm @MCS7 (HT20); 17 dBm @MCS0 (HT40); 15 dBm @MCS7 (HT40) |
| Power Cable | EU Standard |
| Power consumption | 12 W (typical) |
| Power supply | DC 12 V - 1 A; PoE (IEEE 802.3 af), 36~57 V DC |
| PWR LED | Power indicator - The LED is on when device power is on |
| Receiver Sensitivity | -139 dBm (Min) |
| Receiver Sensitivity (Typical) | 802.11b; -95 dBm @1 Mbps; -88 dBm @11 Mbps; 802.11g; -90 dBm @6 Mbps; -75 dBm @54 Mbps; 802.11n (2.4G); -89 dBm @MCS0 (HT20); -72 dBm @MCS7 (HT20); -86 dBm @MCS0 (HT40); -68 dBm @MCS7 (HT40) |
| Server Address and Port Setup | Management: MQTT Bridge |
| Statistics | Network: Firewall; Management: Build-in Server |
| Supports class A, C | Network: Wi-Fi AP mode; Management: WEB management |
| Transmit Power | 27 dBm (Max) |
| TX Power Setup | Network: DHCP Server/Client; Management: NTP |
| Weight | 0.3 kg |
| Wi-Fi Feature | Frequency: 2.4 GHz (802.11b/g/n); RX Sensitivity: -95 dBm (Min); TX Power: 20 dBm (Max); Operation channels: 2.4 GHz: 1-13 |
| Wireless Standard | IEEE 802.11b/g/n |
| WLAN LED | AP Mode:; -ON - The AP is up; -OFF - The AP is down; -Flicker - Data receiving and sending; STA Mode:; -Slow flicker (1 Hz) - Disconnected; -ON - Connected; -Flicker - Data receiving and sending |
No specification matches.
Last verification : 2026-10-31
Official documents and the technical data recorded for 920419. For a missing document or a specific revision, our experts send it to you.
RAKwireless PoE backup UPS with built-in lithium battery, designed to keep RAK7268 indoor gateways powered. PoE output 36 to 57 V DC.
| Parameter | Value |
|---|---|
| Dimensions | 66x127x36 mm |
| Antenna | LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna |
| Breathing LED | Breathing after system up |
| Cellular | Supports Quectel EG95-E/EG95-NA (IoT/M2M -optimized LTE Cat 4 Module); EG95-E for EMEA Region; - LTE FDD: B1/B3/B7/B8/B20/B28A; - WCDMA: B1/B8; - GSM/EDGE: B3/B8; EG95-NA for North America Region; - LTE FDD: B2/B4/B5/B12/B13; - WCDMA: B2/B4/B5; Optional supports other PCIe LTE module for Global Region |
| Compatible Products | Indoor PoE power supply for RAK7268 Series |
| Computing | MT7628, DDR2 RAM 128 MB |
| Console | Type-C USB |
| Country Code Setup | Network: 802.1q; Management: Firmware update |
| Data logger | Network: Router module NAT; Management: Configuring the LoRa Packet Forwarder |
| Dimension | 166x127x36 mm |
| EG95-E for EMEA Region | LTE FDD: B1/B3/B7/B8/B20/B28A; WCDMA: B1/B8; GSM/EDGE: B3/B8 |
| EG95-NA for North America Region | LTE FDD: B2/B4/B5/B12/B13; WCDMA: B2/B4/B5; Optional supports other PCIE LTE module for Global Region |
| Enclosure Material | Plastic |
| ETH | RJ45 (10/100 M) |
| ETH LED | ON - Linkup; OFF - Linkdown; Flicker - Data transmitting and receiving |
| Ingress Protection | IP30 |
| Installation Method | Wall mounting |
| LEDs | POWER LED; Breathing LED (Top side); ETH LED (On ETH connector); LoRa LED; WLAN LED; LTE LED |
| Location Setup | Network: LTE APN setup; Management: OpenVPN, Ping Watch Dog |
| LoRa Feature | SX1302 Mini PCIe card; 8 Channels; RX Sensitivity: -139 dBm (Min); TX Power: 27 dBm (Max); Frequency: EU433/CN470/EU868/US915/AS923/AU915/IN865/KR920 |
| LoRa LED | ON - LoRa is working; OFF - LoRa is not working; Flicker - Indicate LoRa Packet receiving and sending |
| LoRa package forward | Network: Uplink backup; Management: SSH2 |
| LTE LED | Slow Flicker (1800 ms High / 200 ms Low) - Network searching; Slow flicker (200 ms High / 1800 ms Low) - Idle; Fast flicker (125 ms High / 125 ms Low) - Ongoing data transfer |
| Model | RAK7268 |
| Operating Frequency | ISM band: 2.412~2.472 GHz |
| Operating Temperature | -10 to 55 ˚C |
| Operation channels | 2.4 GHz: 1-13; 19 dBm @1 Mbps; 19 dBm @11 Mbps; 802.11g; 18 dBm @6 Mbps; 16 dBm @54 Mbps; 802.11n (2.4G); 18 dBm @MCS0 (HT20); 16 dBm @MCS7 (HT20); 17 dBm @MCS0 (HT40); 15 dBm @MCS7 (HT40) |
| Power Cable | EU Standard |
| Power consumption | 12 W (typical) |
| Power supply | DC 12 V - 1 A; PoE (IEEE 802.3 af), 36~57 V DC |
| PWR LED | Power indicator - The LED is on when device power is on |
| Receiver Sensitivity | -139 dBm (Min) |
| Receiver Sensitivity (Typical) | 802.11b; -95 dBm @1 Mbps; -88 dBm @11 Mbps; 802.11g; -90 dBm @6 Mbps; -75 dBm @54 Mbps; 802.11n (2.4G); -89 dBm @MCS0 (HT20); -72 dBm @MCS7 (HT20); -86 dBm @MCS0 (HT40); -68 dBm @MCS7 (HT40) |
| Server Address and Port Setup | Management: MQTT Bridge |
| Statistics | Network: Firewall; Management: Build-in Server |
| Supports class A, C | Network: Wi-Fi AP mode; Management: WEB management |
| Transmit Power | 27 dBm (Max) |
| TX Power Setup | Network: DHCP Server/Client; Management: NTP |
| Weight | 0.3 kg |
| Wi-Fi Feature | Frequency: 2.4 GHz (802.11b/g/n); RX Sensitivity: -95 dBm (Min); TX Power: 20 dBm (Max); Operation channels: 2.4 GHz: 1-13 |
| Wireless Standard | IEEE 802.11b/g/n |
| WLAN LED | AP Mode:; -ON - The AP is up; -OFF - The AP is down; -Flicker - Data receiving and sending; STA Mode:; -Slow flicker (1 Hz) - Disconnected; -ON - Connected; -Flicker - Data receiving and sending |
Points to check before using 920419 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Power Cable | EU Standard |
| Power consumption | 12 W (typical) |
| Power supply | DC 12 V - 1 A; PoE (IEEE 802.3 af), 36~57 V DC |
| Transmit Power | 27 dBm (Max) |
| TX Power Setup | Network: DHCP Server/Client; Management: NTP |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of 920419 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Antenna": LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna.
Yes — recorded under "Antenna": LoRa: RP-SMA female connector; LTE: Internal antenna; Wi-Fi: Internal antenna.
Yes — recorded under "Console": Type-C USB.
-10 to 55 ˚C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Indoor PoE backup power supply for LoRaWAN gateway

PoE backup UPS for RAK Edge Gateway with PoE output — Indoor PoE power supply for RAK7268 Series / UK Standard

PoE backup UPS for RAK Edge Gateway with PoE output — Indoor PoE power supply and Lightning Protection for RAK7289/RAK7240 Series / US Standard

PoE backup UPS for RAK Edge Gateway with PoE output — Indoor PoE power supply and Lightning Protection for RAK7289/RAK7240 Series / EU Standard

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 920419 |
| Family | PoE backup UPS for RAK Edge Gateway with PoE output |
| Manufacturer | RAKwireless |
DC UPS
Indoor PoE backup UPS with lightning protection for LoRa gateway
Price on request
DC UPS
Indoor PoE backup UPS for LoRa gateway
Price on request
DC UPS
Mini UPS with 12V DC output · Ref. : 920415
Price on request
DC UPS
Backup PoE power supply for indoor LoRaWAN gateway
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details