Outdoor omnidirectional 3 dBi fiberglass antenna for LoRa with N-Type male connector, covering 860-930 MHz, 470-510 MHz and EU433 MHz bands.
Frequency bandEU433MHz
Frequency860 MHz - 930 MHz
Storage Temp-30ºC~ +75ºC
Dimensions860MHz-930MHz: Փ 28.0x&360mm
Beamwidth360 degrees
ConnectorN-Type Male
Product overview
Overview. The RAKwireless 911004 is an outdoor omnidirectional LoRa antenna rated 3 dBi, with a fiberglass radome. It is designed for outdoor deployment and is IP67 rated.
Main characteristics. 3 dBi gain, vertical polarization, 360-degree beamwidth, 50 Ohm impedance and VSWR of 1.8 or less. The connector is an N-Type male, with an N-Type to MHF conversion.
Frequencies and dimensions. Coverage from 860 MHz to 930 MHz, from 470 MHz to 510 MHz and the EU433 MHz band. Dimensions of Փ 28.0 x 360 mm for the 860-930 MHz band and Փ 28.0 x 600 mm for the EU433 MHz and 470-510 MHz bands.
Environment. Operating temperature from -20 °C to +65 °C and storage temperature from -30 °C to +75 °C.
Typical uses. Suited to elevated outdoor positions in urban or suburban areas, for stable coverage of nearby devices. It is notably suitable for Helium hotspots such as the RAK Hotspot V2 or the MNTD Hotspot. The manufacturer recommends combining antennas of different gains to reduce blind spots.
Installation. The package includes one antenna and one pigtail interface converter. The RP-SMA to N-Type cable supplied is for indoor use only; a corresponding Pulsar cable is required for outdoor deployment. To select the band suited to your region, refer to the TTN guide and the LoRa Alliance Regional Parameters documentation.
Outdoor omnidirectional 3 dBi fiberglass antenna for LoRa with N-Type male connector, covering 860-930 MHz, 470-510 MHz and EU433 MHz bands.
Frequency bandEU433MHz
Frequency860 MHz - 930 MHz
Storage Temp-30ºC~ +75ºC
Dimensions860MHz-930MHz: Փ 28.0x&360mm
Beamwidth360 degrees
2. Datasheet extract (recorded values)
Parameter
Value
Dimensions
860MHz-930MHz: Փ 28.0x&360mm
Frequency band
EU433MHz
Beamwidth
360 degrees
Connector
N-Type Male
Connector Type
N-Type to MHF
EU433MHz and 470-510MHz
Փ 28.0x&600mm
Frequency
860 MHz - 930 MHz
Gain
3dBi
Impedance
50 Ohms
Operation Temp
-20ºC~ +65ºC
Polarization
Vertical
Radome Body
Fiberglass
Storage Temp
-30ºC~ +75ºC
VSWR
≤1.8
Wireless technologies
LoRa
Applications and use cases
Architectures in which 911004 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Warehouses, basements and metal buildings block the mobile signal. A signal booster with an outdoor antenna and indoor antennas brings the operator’s signal inside where it is missing
To check
Bands and operators to cover
Outdoor signal level where the donor antenna will be installed
Indoor area and layout to cover
Associated system blocks
Signal boosterAntennasCables
Need a complete solution?
Send a request for 911004 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
911004
3 dBi Fiberglass Omnidirectional Antenna for LoRa, N-Type
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details