Outdoor omnidirectional antenna with 3 dBi gain for LoRa networks, covering the 860-930 MHz and 470-510 MHz bands, with an N-Type male connector and IP67 protection.
Frequency band470MHz - 510MHZ
Frequency860 MHz - 930 MHz
Storage Temp-30ºC~ +75ºC
Dimensions860MHz-930MHz: Փ 28.0x&360mm
Beamwidth360 degrees
ConnectorN-Type Male
Product overview
RAKwireless 912004, omnidirectional fiberglass antenna for LoRa — the antenna is designed for outdoor deployment, with a connector built into the antenna body that increases its resistance to external conditions, and an IP67 rating.
Main characteristics. 3 dBi gain, 360-degree beamwidth with vertical polarization, 50 Ohms impedance and VSWR of 1.8 or less. The radome is fiberglass and the connector is N-Type male, with an N-Type to MHF pigtail converter included.
Frequency bands. 860 MHz to 930 MHz for the US915, AU915, AS923, EU868, IN865 and RU864 regions, and 470 MHz to 510 MHz as well as EU433 for the corresponding regions. Dimensions differ by band: Ф 28.0 x 360 mm for 860-930 MHz and Ф 28.0 x 600 mm for EU433 and 470-510 MHz.
Operating conditions. operating temperature from -20 ºC to +65 ºC and storage temperature from -30 ºC to +75 ºC.
Typical uses. suited to elevated deployment in urban or suburban areas, covering a wide sector with limited blind spots. It is particularly suitable for Helium hotspots such as the RAK Hotspot V2 or the MNTD Hotspot. The manufacturer recommends combining antennas with different dBi values to improve overall coverage.
Integration. the RP-SMA to N-Type cable supplied is for indoor use only; for outdoor installation, a matching Pulsar cable is required. The frequency band should follow the LoRa regulations of your region, as described in the TTN guide and the LoRa Alliance Regional Parameters documentation.
Outdoor omnidirectional antenna with 3 dBi gain for LoRa networks, covering the 860-930 MHz and 470-510 MHz bands, with an N-Type male connector and IP67 protection.
Frequency band470MHz - 510MHZ
Frequency860 MHz - 930 MHz
Storage Temp-30ºC~ +75ºC
Dimensions860MHz-930MHz: Փ 28.0x&360mm
Beamwidth360 degrees
2. Datasheet extract (recorded values)
Parameter
Value
Dimensions
860MHz-930MHz: Փ 28.0x&360mm
Frequency band
470MHz - 510MHZ
Beamwidth
360 degrees
Connector
N-Type Male
Connector Type
N-Type to MHF
EU433MHz and 470-510MHz
Փ 28.0x&600mm
Frequency
860 MHz - 930 MHz
Gain
3dBi
Impedance
50 Ohms
Operation Temp
-20ºC~ +65ºC
Polarization
Vertical
Radome Body
Fiberglass
Storage Temp
-30ºC~ +75ºC
VSWR
≤1.8
Wireless technologies
LoRa
Applications and use cases
Architectures in which 912004 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Warehouses, basements and metal buildings block the mobile signal. A signal booster with an outdoor antenna and indoor antennas brings the operator’s signal inside where it is missing
To check
Bands and operators to cover
Outdoor signal level where the donor antenna will be installed
Indoor area and layout to cover
Associated system blocks
Signal boosterAntennasCables
Need a complete solution?
Send a request for 912004 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
912004
3 dBi Omnidirectional Fiberglass Antenna N-Type to MHF
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details