Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

JXBS-3001-PH-RS – Industrial pH sensor probe I/O with RS-485

Industrial pH sensor probe I/O with RS-485

Maker, Prototyping, Open-Hardware & Developer Boards

  • RS-485
  • 4-20 mA current loop
Manufacturer part number
C10002
Manufacturer
RAKwireless

RAKwireless accessory for the SensorHub platform, the Sensor Probe IO connects a pH sensor over RS-485, SDI-12 or 4-20 mA, with IP67 protection.

Product overview

Overview. The RAKwireless Sensor Probe IO is an accessory for the RAK2560 SensorHub platform, allowing sensors to be connected to the SensorHub ecosystem. This reference is supplied with a pH sensor (JXBS-3001-PH-RS).

Main characteristics. The probe supports one RS-485 device, one SDI-12 device, one 4-20 mA device, two DO dry-contact outputs and one DI input, as well as one-wire protocol. It is powered from 5 V, VIN or 24 V (1 A).

Interfaces and connectivity. Several probes can be connected to a single SensorHub port using the splitter cable, and the distance between the SensorHub and the probe can be extended with the extension cable. Sensors are configured via the WisToolBox app.

Power and environment. The probe is weatherproof, with an IP67 rating for the probe body, and can be used indoors or outdoors. It requires an external power supply and cannot be battery-powered; it cannot operate standalone and requires the RAK2560 SensorHub.

Integration. The SensorHub is available in two variants depending on communication type: LoRaWAN only, or LoRaWAN and NB-IoT. Custom or third-party sensors not listed are not currently connectable; compatibility must be checked with the manufacturer.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote