RAK1902 – Pressure sensor probe for Sensor Hub

Pressure sensor probe for Sensor Hub

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
C10006
Manufacturer
RAKwireless

RAK1902 pressure sensor probe from RAKwireless, an accessory for the RAK2560 Sensor Hub that measures atmospheric pressure indoors or outdoors thanks to its IP67 weatherproof housing.

Product overview

Overview. The RAKwireless RAK1902 is a pressure sensor probe designed for the RAK2560 Sensor Hub. It integrates the RAK1902 pressure sensor from the WisBlock family and cannot be used standalone, as it requires the RAK2560.

Main characteristics. The sensor measures pressure with a relative accuracy of ±0.1 hPa over 800 to 1100 hPa, within an operating pressure range of 260 to 1260 hPa. Pressure output is 24-bit, with a sensitivity of 4096 LSB/hPa and an RMS sensing noise of 0.0075 hPa with embedded filtering. Available pressure output data rates are 1, 10, 25, 50 and 75 Hz. Temperature is measured with an absolute accuracy of ±1.5 °C between 0 and 65 °C.

Interfaces and connectivity. The probe communicates over I2C. It connects to the Sensor Hub through its 24-pin connector and supports LoRa wireless technology. Several probes can be connected to a single Sensor Hub port using a splitter cable, and distance can be extended with an extension cable.

Power and environment. The supply voltage ranges from 1.7 to 3.6 V, with a nominal value of 3.3 V. Current consumption is 12 µA at a 1 Hz output data rate, and shutdown current is 1 µA. The operating temperature range is -40 to +85 °C. The housing is rated IP67, allowing use indoors or outdoors.

Typical uses. This probe suits pressure measurement in sensor installations deployed indoors or outdoors, connected to the RAK2560 Sensor Hub and transmitting data over LoRa.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote