RS-ECTHPH-N01-TR-1-T – 4 in 1 soil nutrient sensor with RS485 Modbus output

4 in 1 soil nutrient sensor with RS485 Modbus output

Soil Moisture Sensors

  • -20°C to +60°C
  • 45*15*127mm
  • ≤1s
  • 85°C
Manufacturer part number
SOIL-NUTRIENT-SENSOR
Manufacturer
Renke
Operating Temperature
-20°C to +60°C
Maximum power consumption
0.5W (24V DC power supply)

Multiparameter soil sensor that simultaneously measures soil moisture, electrical conductivity, temperature and pH, with RS485 Modbus output for long-term measurement in a fixed area.

Product overview

Overview. The Renke RS-ECTHPH-N01-TR-1-T is a multiparameter soil sensor that measures soil moisture, electrical conductivity, temperature and pH simultaneously from a single housing, replacing several separate soil sensors. It consists of five stainless steel probes and can measure one or several soil parameters as required.

Measurement characteristics. Soil moisture from 0 to 100 %RH with an accuracy of 2 % between 0 and 50 %RH and 3 % between 50 and 100 %RH, resolution 0.1 %. Electrical conductivity from 0 to 20000 μS/cm with an accuracy of ±3 %FS up to 10000 μS/cm and ±5 %FS above, resolution 1 μS/cm. Soil temperature from -40 to 80 ℃ with an accuracy of ±0.5 ℃ at 25 ℃, resolution 0.1 ℃. pH from 3 to 9 with a resolution of 0.1. Response time ≤1 s and stabilization time ≤5 min.

Connectivity and power. RS485 output using the Modbus protocol, allowing connection to a PLC or data acquisition system supporting this protocol. DC power supply from 4.5 to 30 V, maximum power consumption 0.5 W at 24 V DC. 2 m cable as standard, cable length customizable on request.

Environment and robustness. IP68 protection rating, housing sealed with black flame-retardant epoxy resin under vacuum. Probes in corrosion-resistant treated alloy, resistant to electrolysis. Operating temperature -20 to +60 °C, core chip temperature resistance 85 °C. Dimensions 45 × 15 × 127 mm.

Typical uses. Long-term, stable measurement of soil conditions in a fixed area, notably for water-saving irrigation, greenhouses, plant cultivation, grassland pastures or soil quality monitoring.

See all specifications

Highlights

  • Dimensions: 45*15*127mm
  • Response time: ≤1s
  • Cable Length: 2m (default), the cable length can be customized as required
  • Core chip temperature resistance: 85°C
  • Maximum power consumption: 0.5W (24V DC power supply)
  • Model: RS-ECTHPH-N01-TR-1-T

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -20°C to +60°C — check it against the installation environment.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Soil Moisture Sensors
Request a quote