SE2012 – Dual-channel digital lock-in amplifier

Dual-channel digital lock-in amplifier

Bench Spectrum Analyzers

  • 20 fA/√Hz (f = 97Hz)
  • 1%
  • 0.5% typ, 1% max
  • 0.1 μVrms to 5 Vrms
Manufacturer part number
SE2012
Manufacturer
Saluki Technology
Current Noise
20 fA/√Hz (f = 97Hz)
Accuracy
1%

Digital lock-in amplifier with two synchronized input channels, designed to extract weak signals buried in strong noise for scientific and industrial measurement.

Product overview

Overview. The SE2012 from Saluki Technology is a dual-channel digital lock-in amplifier with two independent, synchronized input channels. It measures the amplitude and phase of two signals at the same time and relies on digital modulation with a 24-bit analog-to-digital converter.

Main characteristics. Frequency range from 10 µHz to 250 kHz (OE2012) or DC to 1.5 MHz (OE2022), full-scale sensitivity from 1 nV to 5 Vrms, frequency accuracy of 2 ppm + 1 µHz, resolution of 1 nHz. Dynamic reserve above 130 dB, distortion of -80 dBFS (f < 100 kHz), gain accuracy of 0.5 % typical and 1 % maximum, stability below 200 ppm/°C.

Interfaces and connectivity. Voltage inputs in single-ended or differential mode with 10 MΩ // 25 pF impedance, and current inputs with 100 Ω or 1 kΩ impedance in transimpedance mode. Two outputs CH1 and CH2 deliver X, Y, R and θ with a ±10 V full scale, 30 mA maximum output current and an update rate of 312.5 kHz. A 3.3 V TTL/CMOS reference output with 50 Ω output impedance completes the instrument.

Filtering and time constants. Synchronous filters available below 200 Hz (18 and 24 dB/octave), time constants from 10 µs to 3 ks below 200 Hz and from 10 µs to 30 s above, with 6, 12, 18 and 24 dB/octave rolloff.

Power and environment. Power supply 220 to 240 VAC, 100 to 120 VAC optional, 50/60 Hz, typical consumption 50 W. Dimensions 448 × 148 × 532 mm, weight 12 kg.

Typical uses. Measurement of low-amplitude signals in a noisy environment, in scientific research and industrial testing, with numerical, bar graph, polar plot or strip chart display on a 5.6-inch 640 × 480 TFT screen. The instrument is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Accuracy: 1%
  • Amplitude: 0.1 μVrms to 5 Vrms
  • Current Input Mode: Single-ended signal (transimpedance input)
  • Current Noise: 20 fA/√Hz (f = 97Hz)
  • Dimension: 448 (W) × 148 (H) × 532 (D) mm (with feet)
  • Display Quantities: Each display shows one trace, traces can be defined as X,Y,R,θ

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Bench Spectrum Analyzers
Request a quote