Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

BLE113 – Bluetooth Low Energy 4.0 Shield for Arduino

Bluetooth Low Energy 4.0 Shield for Arduino

Maker, Prototyping, Open-Hardware & Developer Boards

  • Bluetooth
Manufacturer part number
101990076
Manufacturer
Seeed Studio

The BLE-Shield v3.0.0 is an Arduino shield built around Bluegiga's Bluetooth 4.0 BLE113 module, enabling Arduino projects to communicate with BLE-enabled smartphones and tablets.

Product overview

Seeed Studio BLE-Shield v3.0.0. This Arduino shield is based on Bluegiga's BLE113 M256K Bluetooth Low Energy module, compliant with Bluetooth 4.0 single mode, and enables Arduino projects to communicate with BLE-enabled smartphones and tablets.

Main characteristics. The hardware and firmware are open source, and the module requires no library on the target platform. The default baud rate is 9600 baud, with 14400, 19200, 28800, 38400, 57600 and 112500 baud selectable through a characteristic, a setting stored in flash memory that persists after power cycling.

Interfaces and connectivity. The UART pins are configurable among RX, TX, 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13, and the interrupt pins among 2, 3 and 7, the interrupt pin going high as soon as the BLE-Shield is connected. The blue connection LED is off by default and is enabled through a dedicated characteristic.

Update and integration. The shield supports OTA firmware updates, for example with Bluegiga's BLEGUI2 tool. The reset switch resets both the BLE-Shield and the Arduino board. A BLE-Shield v3.0.0 service exposes the Bluetooth device address, baud rate, LED and data characteristics.

Typical uses. This shield suits Arduino prototypes controlled from a smartphone or tablet via Bluetooth Low Energy.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote