Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

CC3200 – Wi-Fi development board with ARM Cortex-M4 MCU

Wi-Fi development board with ARM Cortex-M4 MCU

Maker, Prototyping, Open-Hardware & Developer Boards

  • Wi-Fi
  • Arm architecture
Manufacturer part number
CC3200
Manufacturer
Seeed Studio

WiFi development board from Seeed Studio based on the Texas Instruments CC3200 microcontroller, with an 80 MHz ARM Cortex-M4 and built-in 802.11 b/g/n WiFi for IoT prototyping.

Product overview

Overview. The Seeed Studio CC3200 WiFi board, also sold as the RedBearLab CC3200 WiFi board, is built around the Texas Instruments CC3200 module, the single-chip ARM Cortex-M4 microcontroller at 80 MHz with built-in WiFi. It is intended for rapid prototyping of Internet of Things projects, WiFi cameras, TCP/IP or UDP clients and servers, and HTTP servers.

Main characteristics. The applications microcontroller subsystem provides 256 KB of RAM and a 1 MB serial flash with file system for the user, together with a hardware crypto engine supporting AES, DES, 3DES, SHA2, MD5, CRC and checksum. The Wi-Fi network processor is a dedicated ARM MCU for 802.11 b/g/n that fully offloads Wi-Fi and Internet protocols from the application microcontroller, with Station, Access Point and Wi-Fi Direct modes.

Security and networking. The board supports WPA2 Personal and Enterprise security and 256-bit AES encryption for TLS and SSL connections. Wi-Fi provisioning can be done with SmartConfig, AP mode or WPS2.

Interfaces and connectivity. Up to 27 individually programmable, multiplexed GPIO pins are available, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C and a four-channel ADC. The board is compatible with most Arduino shields and hardware compatible with the BLE Shield, BLE Nano and BLE Mini.

Power and low-power operation. The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages, and a hibernate mode with RTC drawing less than 7 μA.

Programming. The board is programmed without jumper changes thanks to a built-in USB interface based on a Freescale MK20. The SDK offers full APIs and many examples for Energia, GCC, IAR System and Texas Instruments Code Composer Studio (CCS).

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote