Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MT2502A – Low-power GSM/GPRS IoT SiP module for wearables

Low-power GSM/GPRS IoT SiP module for wearables

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
MT2502A
Manufacturer
Seeed Studio

The Seeed Studio MT2502A is a low-power IoT SiP module with embedded GPRS/GSM, designed for wearables and connected devices that communicate with other smart devices or cloud services.

Product overview

Overview. The Seeed Studio MT2502A is a low-cost, low-power IoT SiP (System in Package) module designed for wearables and Internet of Things (IoT) devices that connect to other smart devices or directly to cloud applications and services.

Main characteristics. The module integrates voice-band, audio-band and base-band analog front-end circuitry as well as a full-featured power management unit. Its embedded GPRS/GSM support, based on a highly integrated SoC design, avoids the need for multiple chips, reducing device size and cost.

Microcontroller subsystem. The MCU subsystem is built around a 32-bit ARM7EJ-S RISC processor with Java hardware acceleration, a high-performance multi-layer AHB bus, a dedicated DMA bus with 16 DMA channels, an on-chip boot ROM for factory flash programming, a watchdog timer and 3 sets of general-purpose timers.

Interfaces and connectivity. The module provides 3 UARTs with hardware flow control supporting baud rates up to 921600 bps, an FS/LS USB 1.1 device controller, a multimedia card and secure digital memory card host controller with a 4-bit SDIO interface, DAI/PCM and I2S interfaces for audio, an I2C master interface and an SPI master/slave interface. It supports QPI and SPI serial flash and includes a dual SIM/USIM controller with hardware T=0/T=1 protocol control.

User interfaces. A 5-row x 5-column keypad controller with hardware scanner, a real-time clock (RTC) operating on a low quiescent current supply, 24 external interrupt lines, 2 PWM outputs and one external channel of 10-bit auxiliary A/D converter.

Power management. A Li-ion battery charger, 12 LDOs supplying the memory card, camera, Bluetooth, RF, SIM card and other uses, a 1 open-drain output switch to drive an LED, and an LDO-type vibrator.

Security. Supports a security key and a chip random ID.

Typical uses. With its UART, I2C, SPI and USB interfaces, the MT2502A suits the development of wearables and connected IoT devices, with the possibility of Wi-Fi and GNSS extension mentioned by the manufacturer. Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote