TF02-i – Industrial LiDAR distance sensor 40 m with CAN interface

Industrial LiDAR distance sensor 40 m with CAN interface

LiDAR Sensors

  • LiDAR
Manufacturer part number
TF02
Manufacturer
Seeed Studio

The TF02-i is an industrial pulse-based LiDAR distance sensor with a maximum range of 40 m, a CAN interface and an IP65 enclosure rating.

Product overview

Overview. The Seeed Studio TF02-i is an industrial-grade single-point LiDAR distance sensor based on pulse time of flight (PTOF), with a maximum detection range of 40 m. It features a CAN communication interface and a supply voltage of 7 to 30 V.

Main characteristics. The frame rate is adjustable from 1 Hz to 1000 Hz, with a default of 100 Hz. Accuracy is ±5 cm from 0.1 to 5 m and 1% from 5 to 40 m, with a distance resolution of 1 cm and a repeatability of less than 2 cm (1σ) from 0.1 to 35 m at 90% reflectivity. The field of view is 3° and the light source is a VCSEL at 850 nm.

Interfaces and connectivity. The sensor communicates over CAN, with an LVTTL level of 3.3 V. Multiple baud rates are configurable.

Power and environment. Power consumption is up to 0.85 W at 12 V, with an average current of up to 70 mA and a peak current of 100 mA. The enclosure is PC/ABS/PMMA with an IP65 rating. The operating temperature range is -20 to 60 °C, and ambient light immunity reaches 100 klux. The cable is 70 cm long and the weight is 60 g with cable.

Typical uses. The TF02-i suits vehicle collision avoidance and safety warning systems, traffic flow statistics, camera triggering, and UAV-assisted takeoff and landing.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote