M0S
Ultra-low power IoT module with WiFi 6, BT 5.2 and Zigbee

- Ultra-Low Power Consumption
- Wifi6 low power consumption feature
- Frequency
- 320MHz
- High Frequency
- 320MHz default
- AI Framework
- TinyMaix Framework
Ultra-low power IoT module with WiFi 6, BT 5.2 and Zigbee
Maker, Prototyping, Open-Hardware & Developer Boards
Compact Sipeed M0S IoT module with tri-mode WiFi 6, BT 5.2 and Zigbee wireless, built on the BL616 chip running at 320 MHz, for low-power prototypes.
Overview. The Sipeed M0S is a Sipeed IoT module in a 10 mm x 11 mm format, based on the Bouffalo Lab BL616 chip, with an integrated ceramic antenna and all IOs routed out.
Main characteristics. RISC-V RV32GCP core running at 320 MHz by default, 480 KB SRAM, 4 MB Flash, FreeRTOS operating system, RISC-V P extended instruction set to accelerate TinyMaix inference.
Interfaces and connectivity. Tri-mode wireless WiFi 6, BT 5.2 and Zigbee, USB 2.0 high-speed OTG up to 480 Mbps, IIC, UART and SPI interfaces, support for RGB LCD displays, DVP camera, Ethernet RMII and SDIO. Ten IO connectors, eight routed to pin headers and two located near the TypeC port.
Power and consumption. Ultra-low power operation thanks to the WiFi 6 low power feature and several wake sources of the chip. One power LED and two user LEDs.
Typical uses. Prototyping of low-power wireless IoT nodes, embedded vision applications with a DVP camera and TinyMaix model recognition, human-machine interfaces with an RGB LCD display.
Integration. Firmware download through the TypeC port or USB UART burning, development possible with the C SDK, MaixHAL C or PikaPython, examples available on GitHub. The module must be powered off before plugging or removing it, and the GPIO operating voltages must not exceed their rated values.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for M0S, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| AI Framework | TinyMaix Framework |
| AI model | · MaixHub |
| Avoid short circuit | During the power-on, avoid any liquid or metal touching PCBA components,otherwise the PCBA will be damaged even burn |
| Bluetooth | BT5.2 |
| Burn Firmware | · USB uart burn; · · USB burn |
| Chip | BL616(RV32GCP) |
| Date — Version — Author | Update content |
| Development | · C SDK; · MaixHAL C; · PikaPython |
| DVP Camera | Yes |
| Electrostatic Protection | Avoid static electricity hitting the PCBA. Release the static electricity of hand before touching the PCBA |
| Flash | 4MByte |
| Frequency | 320MHz |
| High Frequency | 320MHz default |
| High speed USB | Support USB2.0 HS OTG,up to 480Mbps |
| IIC/UART/SPI | Yes |
| IO connector x 10 | 8 IO route to Pin headers; 2 IOs near TypeC Port |
| Key x 1 | Press this key then boot this device to burn this module |
| LED x 3 | One power LED,Two user LEDs |
| Main Chip BL616 | RISC-V CPU:RV32GCP@320MHz default |
| Model platform | TinyMaix + MaixHub |
| Module x 1 | M0S Module |
| Onboard Components | Ceramic antenna |
| Operating Voltage | Do not allow the actual operating voltage of the GPIO to exceed the rated value, otherwise the PCBA will be permanently damaged |
| OS | FreeRTOS |
| Others | Size:10mm (W) x 11mm (H) |
| Plug and Remove | Power off completely before plugging or removing it |
| Rich peripheral ports | Support RGB LCD,DVP Camera,Ethernet RMII and SDIO |
| Sipeed examples | · https://github.com/sipeed/M0S_BL616_example |
| Size | 10mm x 11mm |
| SRAM | 480KB |
| Tiny Size | Place ceramic antenna on 10x11 mm tiny size, and route all IO out |
| Tri-Mode Wireless | WiFi6 / BT 5.2 / Zigbee |
| TypeC Port x 1 | To download firmware or other custom USB function |
| Ultra-Low Power Consumption | Wifi6 low power consumption feature |
| USB | USB2.0 HS OTG 480Mbps |
| WiFi | WiFi6 |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for M0S. For a missing document or a specific revision, our experts send it to you.
Compact Sipeed M0S IoT module with tri-mode WiFi 6, BT 5.2 and Zigbee wireless, built on the BL616 chip running at 320 MHz, for low-power prototypes.
| Parameter | Value |
|---|---|
| AI Framework | TinyMaix Framework |
| AI model | · MaixHub |
| Avoid short circuit | During the power-on, avoid any liquid or metal touching PCBA components,otherwise the PCBA will be damaged even burn |
| Bluetooth | BT5.2 |
| Burn Firmware | · USB uart burn; · · USB burn |
| Chip | BL616(RV32GCP) |
| Date — Version — Author | Update content |
| Development | · C SDK; · MaixHAL C; · PikaPython |
| DVP Camera | Yes |
| Electrostatic Protection | Avoid static electricity hitting the PCBA. Release the static electricity of hand before touching the PCBA |
| Flash | 4MByte |
| Frequency | 320MHz |
| High Frequency | 320MHz default |
| High speed USB | Support USB2.0 HS OTG,up to 480Mbps |
| IIC/UART/SPI | Yes |
| IO connector x 10 | 8 IO route to Pin headers; 2 IOs near TypeC Port |
| Key x 1 | Press this key then boot this device to burn this module |
| LED x 3 | One power LED,Two user LEDs |
| Main Chip BL616 | RISC-V CPU:RV32GCP@320MHz default |
| Model platform | TinyMaix + MaixHub |
| Module x 1 | M0S Module |
| Onboard Components | Ceramic antenna |
| Operating Voltage | Do not allow the actual operating voltage of the GPIO to exceed the rated value, otherwise the PCBA will be permanently damaged |
| OS | FreeRTOS |
| Others | Size:10mm (W) x 11mm (H) |
| Plug and Remove | Power off completely before plugging or removing it |
| Rich peripheral ports | Support RGB LCD,DVP Camera,Ethernet RMII and SDIO |
| Sipeed examples | · https://github.com/sipeed/M0S_BL616_example |
| Size | 10mm x 11mm |
| SRAM | 480KB |
| Tiny Size | Place ceramic antenna on 10x11 mm tiny size, and route all IO out |
| Tri-Mode Wireless | WiFi6 / BT 5.2 / Zigbee |
| TypeC Port x 1 | To download firmware or other custom USB function |
| Ultra-Low Power Consumption | Wifi6 low power consumption feature |
| USB | USB2.0 HS OTG 480Mbps |
| WiFi | WiFi6 |
Answers to the questions that the recorded characteristics of M0S can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "IIC/UART/SPI": Yes.
Yes — recorded under "WiFi": WiFi6.
Yes — recorded under "Bluetooth": BT5.2.
Yes — recorded under "Rich peripheral ports": Support RGB LCD,DVP Camera,Ethernet RMII and SDIO.
Yes — recorded under "Burn Firmware": · USB uart burn; · · USB burn.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ultra-low power IoT module with WiFi 6, BT 5.2 and Zigbee

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | M0S |
| Manufacturer | Sipeed |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details