Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SPMOD - LoRa – SPMOD LoRa SPI module for MaixPy boards

SPMOD LoRa SPI module for MaixPy boards

Maker, Prototyping, Open-Hardware & Developer Boards

  • LoRaWAN
Manufacturer part number
SPMOD_LORA
Manufacturer
Sipeed

Sipeed SPMOD LoRa module built around the M-XL8 SX1276 module, connected by SPI to a MaixPy board in the Sipeed-SPMOD format for long-range wireless communication.

Product overview

Overview. The Sipeed SPMOD - LoRa is a LoRa module in the Sipeed-SPMOD format that plugs onto a MaixPy board and communicates over SPI with an M-XL8 SX1276 module integrating a LoRa modem and an adjustable power amplifier.

Main characteristics. The module operates in the 370 MHz to 1200 MHz range with a maximum transmit power of 20 dBm (100 mW). Its dimensions are 25.0 x 10.0 x 4.3 mm. The modem includes built-in CRC and an adjustable +12 dBm PA as well as an LNA. The RSSI value listed is 127 dB.

Interfaces and connectivity. The 2.54 mm, 8-pin connector provides the SPI link (CS on IO_20, SCK on IO_21, MOSI on IO_8, MISO on IO_15), along with the IRQ signal on IO_6 and RST on IO_7.

Typical uses. The module suits LoRa link development with a MaixPy board or another K210 board, for transmission or reception, based on the C and MaixPy examples provided by the manufacturer.

Integration. Initialisation examples for the SPI bus and module configuration are provided by the manufacturer. The manufacturer recommends compiling the MaixPy firmware from the latest source code.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote